dtterm CAPS lock not working

[Michael Blansfield]

Hello,

Surprised that this is not more widely known but here goes.

When running dtterm on an HP-UX server and displaying back to a RHEL 5.1 system the caps lock key does not work.

Is there a switch or escape sequence that needs to be used? Or is it a key mapping that needs to be changed?

Thanks,

mgb

[Mark McDonald_2]

can you post "stty -a" and check man stty. It may be one of these settings.

[Michael Blansfield]

Here is the stty -a output:

speed 9600 baud; line = 0;
rows = 24; column = 80
min = 0; time = 0;
intr = ^C; quit = ^\; erase = ^H; kill = ^U;
eof = ^D; eol = ^@; eol2 = ^@; swtch = ^@
start = ^@; stop = ^@; susp = ^@; dsusp = ^@;
werase = ^@; lnext = ^@;
-parenb -parodd cs8 -cstopb hupcl cread -clocal -loblk -crtscts -crts
-ignbrk -brkint -ignpar -parmrk -inpck -istrip -inlcr -igncr icrnl -iuclc
ixon -ixany ixoff -imaxbel -rtsxoff -ctsxon -ienqak
isig icanon -iexten -xcase echo echoe echok -echonl -noflsh
echoctl -echoprt echoke -flusho -pendin
opost -olcuc onlcr -ocrnl -onocr -onlret -ofill -ofdel -tostop

We checked the stty -a on a dtterm running on another X server(HP-UX)and the caps lock works. There were a few differences which I changed but no luck. We checked the man page but did not see anything that looked relevant. It seems like an X server issue.

Thanks,

mgb