System Administration
cancel
Showing results for 
Search instead for 
Did you mean: 

error while installaing hp-ux march2013 update

error while installaing hp-ux march2013 update

Hi ,

 

I  am trying to install hp-ux 11iv3 march 2013update but got the below error:

 

io_destroy_with_dsf: io_destroy failed
class : disk, instance 19
The LUN callback routine has failed the LUN destroy request as there are 1 active opens on the LUN (64000/0xfa00/0xa).

 

Can any one help!!

 

Thanks

AbhishekJ

6 REPLIES
Torsten.
Acclaimed Contributor

Re: error while installaing hp-ux march2013 update

Some more context would be required I guess ...

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   

Re: error while installaing hp-ux march2013 update

means??
Torsten.
Acclaimed Contributor

Re: error while installaing hp-ux march2013 update

Info about server, disks or LUNs, session capture ...


Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   

Re: error while installaing hp-ux march2013 update

Hi Abhishek,

Please check the installation media .. Are you installing from DVD or Local depot ?

Re: error while installaing hp-ux march2013 update

 

 

I am installing using a depot file and Booting using iLO Virtual DVD....


its a itnaium machine model : rx2800 i2

 

now serevr is not booting again as it seems it is not able to find boot path...

 

Can it be a root disk failure issue?

 

Initial instalationnstarted with below FS config with VxFS:

 

/              vxfs              1.0 GB      38        yes            fstab          /dev/vx/dsk/rootdg/rootvol
/home          vxfs            512.0 MB      4         yes            fstab          /dev/vx/dsk/rootdg/homevol
/opt           vxfs              5.0 GB      52        yes            fstab          /dev/vx/dsk/rootdg/optvol
/opt/oracle    vxfs              8.0 GB      0         yes            fstab          /dev/vx/dsk/rootdg/lvol_oracle
/stand         hfs               1.1 GB      14        yes            fstab          /dev/vx/dsk/rootdg/standvol
/tmp           vxfs              1.0 GB      2         yes            fstab          /dev/vx/dsk/rootdg/tmpvol
/usr           vxfs              3.0 GB      67        yes            fstab          /dev/vx/dsk/rootdg/usrvol
/var           vxfs              5.0 GB      6         yes            fstab          /dev/vx/dsk/rootdg/varvol
/var/tmp       vxfs              1.0 GB      2         yes            fstab          /dev/vx/dsk/rootdg/vartmpvol

P Arumugavel
Respected Contributor

Re: error while installaing hp-ux march2013 update

Event Number: 43
•WBEM Severity: DEGRADED/WARNING
•Event Summary: The lun callback routine has failed the lun destroy request as there are active opens on the lun.
•Event Description: The lun callback routine has failed the lun destroy request as there are active opens on the lun.
•Probable Cause: Unknown
•Event Category: Secondary Storage Device
•Event Sub-Category: Unknown
•Cause 1 : Lun cannot be destroyed as it is currently open.
•Recommended Action1 : Examine the current open references to the lun and close them if the lun needs to be deleted using rmsf. Re-run rmsf upon closing all pending opens on the lun.


I would suggest to go for a support case with HP...