System Administration
cancel
Showing results for 
Search instead for 
Did you mean: 

finding device from lbolt error

 
sen_ux
Valued Contributor

finding device from lbolt error

Hi All,

How to find out the device name from the below error.

SCSI: Reset detected -- lbolt: 826720555, bus: 1
lbp->state: 4060
lbp->offset: ffffffff
lbp->uPhysScript: e007c000
From most recent interrupt:
ISTAT: 02, SIST0: 02, SIST1: 00, DSTAT: 80, DSPS: e007c028
lsp: 0000000000000000
lbp->owner: 0000000000000000
scratch_lsp: 0000000000000000
Pre-DSP script dump [fffffff4a007c0e0]:
e0340004 00000000 e0100004 00000000
48000000 00000000 78350000 00000000
Script dump [fffffff4a007c100]:
50000000 e007c028 80000000 0000000b
0f000001 e007c5c0 60000040 00000000

Thanks
sen
3 REPLIES
Vinoyee Madashery Poulo
Frequent Advisor

Re: finding device from lbolt error

execute dmesg and you may find the minor number for this device then check /dev/dsk directory.
Shahul
Esteemed Contributor

Re: finding device from lbolt error

Hi,

Check for EMS alert in syslog.log, there will be a command line entry in the error message, if you execute that, it will give you the hardware path.

Good Luck
Shahul
likid0
Honored Contributor

Re: finding device from lbolt error