HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
cancel
Showing results for 
Search instead for 
Did you mean: 

frecover via SAM in 11v3.1

 
SOLVED
Go to solution
so.nimda
Super Advisor

frecover via SAM in 11v3.1

Hi,

How do I restore my backup (via fbackup) using SAM in 11v3.1?

I can't seem to find option unlike in 11v2.3

Thanks
7 REPLIES
Torsten.
Acclaimed Contributor
Solution

Re: frecover via SAM in 11v3.1

frecover is still there, but not sam. Use it manually

http://docs.hp.com/en/B2355-60130/frecover.1M.html

but you should focus on pax.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
so.nimda
Super Advisor

Re: frecover via SAM in 11v3.1

Hi Torsten,

Thanks for your reply.

It's more user-friendly in SAM than command line.
Torsten.
Acclaimed Contributor

Re: frecover via SAM in 11v3.1

You are probably right, but remember:

frecover(1M)
TO BE OBSOLETED !

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Sajjad Sahir
Honored Contributor

Re: frecover via SAM in 11v3.1


Dear .nimda

see man pages of fbackup/frecover

u will get good help

sajjad
so.nimda
Super Advisor

Re: frecover via SAM in 11v3.1

Hi Torsten,

I have read the documentation and it says that pax extracts, writes, etc.

Does it work like tar?

Can it be used (like fbackup) to do full system backup?

Re: frecover via SAM in 11v3.1

>Does it work like tar?
>Can it be used (like fbackup) to do full system backup?

Better than tar. But lots worse than fbackup, it isn't industrial strength.

>Torsten: but you should focus on pax.

I don't think pax will meet the needs of an enterprise environment.
Jestin John Chacko
Regular Advisor

Re: frecover via SAM in 11v3.1

Please check my question in itrc about pax and its use.May be this will give you some idea about pax




http://forums11.itrc.hp.com/service/forums/questionanswer.do?threadId=1325089