cancel
Showing results for 
Search instead for 
Did you mean: 

how can i export display

subrata biswal
Frequent Advisor

how can i export display

actually i am taking our machine via telnet
from window to hp ux machine
how can i export my display from window machine to unix machine. and also vice verse

and another question is my cdrom already share.
how can i mount from other machine

subrata
7 REPLIES
Torsten.
Acclaimed Contributor

Re: how can i export display

I'm not aware of a solution to share the display from windows to hp-ux.

From hp-ux to windows you should download and run "mobaxterm" on your PC.

From where to where and how did you share the CDROM???

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
subrata biswal
Frequent Advisor

Re: how can i export display

from window machine i am taking remote to hp -ux machine which is rp8400. for particular application it was showing ur environment variable is not set.
how can i set this environment varible


second
in hpux rp8400 cdrom is share.
how can i export it to another hp ux machine that i can work

subrata

Doug Burton
Respected Contributor

Re: how can i export display

Export HP-UX to a Windows PC:
Get/install Exceed or ReflectionX or CYGwin. On your HP server do: export DISPLAY=<0.0>

Not sure how to export your Windows display to an HP-UX box. Never tried it or wanted to do it.

Export your CD to another Unix server:
http://home.roadrunner.com/~batcave/unixnotes.htm#Mounting_CDs
subrata biswal
Frequent Advisor

Re: how can i export display

if i putting export display =ip 0.0
then after xhost +
i m geeting error. u can not export the
the display



subrata
Torsten.
Acclaimed Contributor

Re: how can i export display

As said before - you should download and run "mobaxterm" on your PC.

Start the application and do a ssh from the shell to the hp-ux server. Then start the X application, e.g. xclock.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   

Re: how can i export display

start xmanager in passive mode ..then
export DISPLAY=:0.0

Hakki Aydin Ucar
Honored Contributor

Re: how can i export display

Hi,

From Unix to Windows export is easy ,you just need GUI Management Software as other people stated.

Exceed, Xmanager, Xmanager Enterprise one of them.

As far as I m concerned I use Graphon Tool Goglobal for example in daily maintenance.

But remember, they are not free of charge