Operating System - HP-UX
1748181 Members
3332 Online
108759 Solutions
New Discussion юеВ

how do I interpret the whathappened output

 
Roboz
Frequent Advisor

how do I interpret the whathappened output

Hello folks, I am trying to get familiar with some troubleshooting tools. Could you please point me to documentation about how do I interpret the whathappened output?
I am finding a bit difficult to get the information I would like.

Many thanks in advance.
4 REPLIES 4
Dave Hutton
Honored Contributor

Re: how do I interpret the whathappened output

Usually I send in the results to HP. But there should be docs on the server.
/usr/contrib/Q4/doc/Q4docs.tar.Z

I'm assuming your talking about Q4 core analyzing.
NMory
Respected Contributor

Re: how do I interpret the whathappened output

Reboz:

Well I guess also that you are talking about q4.

That is known only by HP and/or very very experienced Sys Admins, but I don't know of noone that have the tools to analyze core dumps and things like that when you use q4.

LN
Sp4admin
Trusted Contributor

Re: how do I interpret the whathappened output

Hi Roboz,

I agree with the others. I have ran Q4 per HP's request and then sent the imformation to HP.

sp,
Roboz
Frequent Advisor

Re: how do I interpret the whathappened output

Thanks for your reply folks but I believe that Q4 produces an ascii file called "Whathappen" (i.e. q4> whathappen - OPTION ) and the output displays the following message:
"Created with WhatHappened: @(#) $Revision: 1.7 $ $Date: mm/dd/yy 11:11:28 $ for 11.i

For information on how to interpret the whathappened output, please see:
http://hprtdt04.grc.hp.com/FirstPass

Unfortunately the URL does not respond (it looked promising for a while.. but...)

Any other ideas or suggestions out there?