HPE Community
Operating System - HP-UX
1752800 Members
5486 Online
108789 Solutions
New Discussion юеВ

Re: how enable wake on lan on hp-ux

 
Steven Schweda
Honored Contributor

тАО07-27-2010 09:53 AM

тАО07-27-2010 09:53 AM

Re: how enable wake on lan on hp-ux

> Jul 27, 2010 10:25:52 GMT 0 pts

> Jul 27, 2010 13:34:05 GMT 7 pts

I'm confused. Are you looking for a way to
control an HP-UX server remotely, or are you
looking for an answer to your original
question?

Is there some actual problem which you are
trying to solve? (My psychic powers are too
weak to let me guess what it might be.)
0 Kudos
Reply
Dennis Handly
Acclaimed Contributor

тАО07-28-2010 02:42 AM

тАО07-28-2010 02:42 AM

Re: how enable wake on lan on hp-ux

>Patrick: While I understand the need for energy savings and being "green" there are limits to what can be done.

There are HPVMs to use existing hardware more efficiently. And for Integrity blades, you can use that to save power and run the chips slower.
0 Kudos
Reply
Torsten.
Acclaimed Contributor

тАО07-28-2010 05:19 AM

тАО07-28-2010 05:19 AM

Re: how enable wake on lan on hp-ux

If you review the Integrity server quickspecs you will find some (e.g. rx2600) that supports wake on lan. This belongs to the core I/O card only.

But why not using the MP/iLO to power the hardware on/off?

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.
__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.