System Administration
cancel
Showing results for 
Search instead for 
Did you mean: 

how to get new disk information

Ranabir_Moulick
Occasional Contributor

how to get new disk information

how to get new disk information after replacement of faulty disk if I don't have ioscan  output

3 REPLIES
Torsten.
Acclaimed Contributor

Re: how to get new disk information

Please tell about your hardware, what you did and the current status.

 

>> if I don't have ioscan  output

Why not run ioscan now?


Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Ranabir_Moulick
Occasional Contributor

Re: how to get new disk information

Hi have run insf, insf -e & ioscan. From ioscan -fnC disk , I have checked every diskl.But still not getting replaced disk info.
Torsten.
Acclaimed Contributor

Re: how to get new disk information

more details needed. Next steps may depend on the disk controller.

please copy the output of  "ioscan -fn", "uname -a" and "model" for the beginning.

Tell what disk (position) you have replaced.


Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!