HPE Community
Operating System - HP-UX
1753283 Members
5574 Online
108792 Solutions
New Discussion юеВ

Re: how to reset the X value of cXtYdZ

 
sunxaj
New Member

тАО07-09-2009 08:24 PM

тАО07-09-2009 08:24 PM

how to reset the X value of cXtYdZ

Hi!

Gentleman!

I have a HP box connected to HP VA 7100,
the ioscan output like this:

disk 0 0/0/1/1.0.0 sdisk CLAIMED DEVICE SEAGATE ST318203LC
/dev/dsk/c1t0d0 /dev/rdsk/c1t0d0
disk 1 0/0/1/1.2.0 sdisk CLAIMED DEVICE SEAGATE ST318203LC
/dev/dsk/c1t2d0 /dev/rdsk/c1t2d0
disk 2 0/0/2/0.0.0 sdisk CLAIMED DEVICE SEAGATE ST318203LC
/dev/dsk/c2t0d0 /dev/rdsk/c2t0d0
disk 3 0/0/2/0.2.0 sdisk CLAIMED DEVICE SEAGATE ST318203LC
/dev/dsk/c2t2d0 /dev/rdsk/c2t2d0
disk 4 0/0/2/1.2.0 sdisk CLAIMED DEVICE HP DVD-ROM 6x/32x
/dev/dsk/c3t2d0 /dev/rdsk/c3t2d0
disk 52 0/4/0/0.8.0.110.0.0.0 sdisk CLAIMED DEVICE HP A6188A
/dev/dsk/c8t0d0 /dev/rdsk/c8t0d0
disk 53 0/4/0/0.8.0.110.0.0.1 sdisk CLAIMED DEVICE HP A6188A
/dev/dsk/c8t0d1 /dev/rdsk/c8t0d1
disk 54 0/4/0/0.8.0.110.0.0.2 sdisk CLAIMED DEVICE HP A6188A
/dev/dsk/c8t0d2 /dev/rdsk/c8t0d2
disk 55 0/4/0/0.8.0.110.0.0.3 sdisk CLAIMED DEVICE HP A6188A
/dev/dsk/c8t0d3 /dev/rdsk/c8t0d3
disk 56 0/4/0/0.8.0.110.0.0.4 sdisk CLAIMED DEVICE HP A6188A
/dev/dsk/c8t0d4 /dev/rdsk/c8t0d4
disk 57 0/4/0/0.8.0.110.0.0.5 sdisk CLAIMED DEVICE HP A6188A
/dev/dsk/c8t0d5 /dev/rdsk/c8t0d5
disk 58 0/4/0/0.8.0.110.0.0.6 sdisk CLAIMED DEVICE HP A6188A
/dev/dsk/c8t0d6 /dev/rdsk/c8t0d6
disk 59 0/4/0/0.8.0.110.0.0.7 sdisk CLAIMED DEVICE HP A6188A
/dev/dsk/c8t0d7 /dev/rdsk/c8t0d7
disk 60 0/4/0/0.8.0.110.0.1.0 sdisk CLAIMED DEVICE HP A6188A
/dev/dsk/c8t1d0 /dev/rdsk/c8t1d0
disk 61 0/4/0/0.8.0.110.0.1.1 sdisk CLAIMED DEVICE HP A6188A
/dev/dsk/c8t1d1 /dev/rdsk/c8t1d1
disk 62 0/4/0/0.8.0.110.0.1.2 sdisk CLAIMED DEVICE HP A6188A
/dev/dsk/c8t1d2 /dev/rdsk/c8t1d2
disk 63 0/4/0/0.8.0.110.0.1.3 sdisk CLAIMED DEVICE HP A6188A
/dev/dsk/c8t1d3 /dev/rdsk/c8t1d3
disk 64 0/4/0/0.8.0.110.0.1.4 sdisk CLAIMED DEVICE HP A6188A
/dev/dsk/c8t1d4 /dev/rdsk/c8t1d4


How can I change the X value of the cXtYdZ to 4, currentlly it is 8.

Thank you !

Best Regards!
0 Kudos
Reply
3 REPLIES 3
Torsten.
Acclaimed Contributor

тАО07-09-2009 08:30 PM

тАО07-09-2009 08:30 PM

Re: how to reset the X value of cXtYdZ

This can be done with ioinit - http://docs.hp.com/en/B2355-90691/ioinit.1M.html - but why you want to do this?

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.
__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
0 Kudos
Reply
sunxaj
New Member

тАО07-09-2009 08:53 PM

тАО07-09-2009 08:53 PM

Re: how to reset the X value of cXtYdZ

Hi!

Thank you!

I want to sync the disks between 2 HP servers, one is c4*, one is c8*.

Br
0 Kudos
Reply
Torsten.
Acclaimed Contributor

тАО07-09-2009 08:57 PM

тАО07-09-2009 08:57 PM

Re: how to reset the X value of cXtYdZ

If you "sync" at VG level, the c_x_ values doesn't matter. Is this a cluster?

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.
__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.