System Administration
cancel
Showing results for 
Search instead for 
Did you mean: 

how to reset the X value of cXtYdZ

sunxaj
Occasional Visitor

how to reset the X value of cXtYdZ

Hi!

Gentleman!

I have a HP box connected to HP VA 7100,
the ioscan output like this:

disk 0 0/0/1/1.0.0 sdisk CLAIMED DEVICE SEAGATE ST318203LC
/dev/dsk/c1t0d0 /dev/rdsk/c1t0d0
disk 1 0/0/1/1.2.0 sdisk CLAIMED DEVICE SEAGATE ST318203LC
/dev/dsk/c1t2d0 /dev/rdsk/c1t2d0
disk 2 0/0/2/0.0.0 sdisk CLAIMED DEVICE SEAGATE ST318203LC
/dev/dsk/c2t0d0 /dev/rdsk/c2t0d0
disk 3 0/0/2/0.2.0 sdisk CLAIMED DEVICE SEAGATE ST318203LC
/dev/dsk/c2t2d0 /dev/rdsk/c2t2d0
disk 4 0/0/2/1.2.0 sdisk CLAIMED DEVICE HP DVD-ROM 6x/32x
/dev/dsk/c3t2d0 /dev/rdsk/c3t2d0
disk 52 0/4/0/0.8.0.110.0.0.0 sdisk CLAIMED DEVICE HP A6188A
/dev/dsk/c8t0d0 /dev/rdsk/c8t0d0
disk 53 0/4/0/0.8.0.110.0.0.1 sdisk CLAIMED DEVICE HP A6188A
/dev/dsk/c8t0d1 /dev/rdsk/c8t0d1
disk 54 0/4/0/0.8.0.110.0.0.2 sdisk CLAIMED DEVICE HP A6188A
/dev/dsk/c8t0d2 /dev/rdsk/c8t0d2
disk 55 0/4/0/0.8.0.110.0.0.3 sdisk CLAIMED DEVICE HP A6188A
/dev/dsk/c8t0d3 /dev/rdsk/c8t0d3
disk 56 0/4/0/0.8.0.110.0.0.4 sdisk CLAIMED DEVICE HP A6188A
/dev/dsk/c8t0d4 /dev/rdsk/c8t0d4
disk 57 0/4/0/0.8.0.110.0.0.5 sdisk CLAIMED DEVICE HP A6188A
/dev/dsk/c8t0d5 /dev/rdsk/c8t0d5
disk 58 0/4/0/0.8.0.110.0.0.6 sdisk CLAIMED DEVICE HP A6188A
/dev/dsk/c8t0d6 /dev/rdsk/c8t0d6
disk 59 0/4/0/0.8.0.110.0.0.7 sdisk CLAIMED DEVICE HP A6188A
/dev/dsk/c8t0d7 /dev/rdsk/c8t0d7
disk 60 0/4/0/0.8.0.110.0.1.0 sdisk CLAIMED DEVICE HP A6188A
/dev/dsk/c8t1d0 /dev/rdsk/c8t1d0
disk 61 0/4/0/0.8.0.110.0.1.1 sdisk CLAIMED DEVICE HP A6188A
/dev/dsk/c8t1d1 /dev/rdsk/c8t1d1
disk 62 0/4/0/0.8.0.110.0.1.2 sdisk CLAIMED DEVICE HP A6188A
/dev/dsk/c8t1d2 /dev/rdsk/c8t1d2
disk 63 0/4/0/0.8.0.110.0.1.3 sdisk CLAIMED DEVICE HP A6188A
/dev/dsk/c8t1d3 /dev/rdsk/c8t1d3
disk 64 0/4/0/0.8.0.110.0.1.4 sdisk CLAIMED DEVICE HP A6188A
/dev/dsk/c8t1d4 /dev/rdsk/c8t1d4


How can I change the X value of the cXtYdZ to 4, currentlly it is 8.

Thank you !

Best Regards!
3 REPLIES
Torsten.
Acclaimed Contributor

Re: how to reset the X value of cXtYdZ

This can be done with ioinit - http://docs.hp.com/en/B2355-90691/ioinit.1M.html - but why you want to do this?

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
sunxaj
Occasional Visitor

Re: how to reset the X value of cXtYdZ

Hi!

Thank you!

I want to sync the disks between 2 HP servers, one is c4*, one is c8*.

Br
Torsten.
Acclaimed Contributor

Re: how to reset the X value of cXtYdZ

If you "sync" at VG level, the c_x_ values doesn't matter. Is this a cluster?

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!