HPE Community
Operating System - HP-UX
1752809 Members
5744 Online
108789 Solutions
New Discussion

Re: hp-ux 11.31 install issue during insert disk 2

 
e303868
Occasional Advisor

‎11-15-2018 04:25 AM

‎11-15-2018 04:25 AM

hp-ux 11.31 install issue during insert disk 2

Hello

I am installing hp-ux version 11.31 after I inserted the disk 2 I get the bellow error:

ERROR: Please try again to insert media number "2".
1) Continue.
Please pick from the choices above. (default: 1):

* Working...
ERROR: Could not correctly mount media number "2". Just in case the media
was already mounted, will try again. Please manually unmount the
media drive, but leave media number "2" in the drive.
- Cannot mount media.
- The "mount" command failed with the return code "1", and generated
the following output:
/dev/deviceFileSystem/Usb/MassStorage/dsk/disk@hp-1008+294=A60020000
001: unrecognized file system

ahmed
0 Kudos
Reply
1 REPLY 1
Torsten.
Acclaimed Contributor

‎11-15-2018 07:37 AM

‎11-15-2018 07:37 AM

Re: hp-ux 11.31 install issue during insert disk 2

bad media?


Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.
__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.