cancel
Showing results for 
Search instead for 
Did you mean: 

hpasmcli

dawn_jose85
Frequent Advisor

hpasmcli

The command hpasmcli is not working in some of the HP Proliant DL 580 servers.The servers with same configuration is working fine.OS loaded i RHEL 4.
What is the issue with servers
4 REPLIES
Michal Kapalka (mikap)
Honored Contributor

Re: hpasmcli

hi,

what does it mean ???

its not installed on the system ??

which version of PSP do you have on your and different server.

"HP ProLiant Support Pack for Windows and Linux"

http://h18000.www1.hp.com/products/servers/management/psp/

mikap
Matti_Kurkela
Honored Contributor

Re: hpasmcli

This is a sysadmins' forum, not a magical all-knowing oracle. Without exact information about the problem, your guess is probably going to be better than mine.

Please show the exact error message (or any other symptoms) you're getting.

Also, please identify the model generation of your server exactly: the original DL580 was branded Compaq, not HP, so your server is at least a DL580 G2. The latest available generation is G7, and there are quite a bit of differences between various generations.

Knowing the RHEL 4 upgrade level and the hpasmcli version might also be helpful. Please run these commands and show their output:

rpm -q hpasm hp-health
uname -a
cat /etc/redhat-release

MK
MK
dawn_jose85
Frequent Advisor

Re: hpasmcli

Server--HP Proliant DL 380
Showing error
Note: all hpasmcli commands may not work in all proliant server.
Then server got stuck without any messages
dawn_jose85
Frequent Advisor

Re: hpasmcli

vpp211root#hpasmcli
HP management CLI for Linux (v1.0)
Copyright 2004 Hewlett-Packard Development Group, L.P.

--------------------------------------------------------------------------
NOTE: Some hpasmcli commands may not be supported on all Proliant servers.
Type 'help' to get a list of all top level commands.
--------------------------------------------------------------------------

ERROR: Could not open /dev/cpqhealth/cdt.
Please make sure the Health Monitor is started.
vpp211root#cd /dev/cpqhealth
ksh: cd: /dev/cpqhealth - No such file or directory

There is no file cpqhealth in /dev