hpux 11.11 SysFaultMgmt Ver. A.04.03.01.02

[Peter Lachnitt]

Hi all,

I´ve a problem with high cpu load of cimprovagt.
After starting cimserver several processes are running.
cimservermain --executor-socket 5
/opt/wbem/lbin/cimserverd
/opt/wbem/lbin/cimprovagt 0 5 10 root SFMProviderModule
/opt/wbem/lbin/cimserver
At this time all looks good but after a while cimprovagt process use high cpu load. (60-80%)
cimprovider looks good.
cimprovider -ls
MODULE STATUS
OperatingSystemModule OK
ComputerSystemModule OK
ProcessModule OK
IPProviderModule OK
IPModule OK
HPUXLVMProviderModule OK
SDProviderModule OK
SFMProviderModule OK

Could anybody help?
Regards Peter

[cnb]

Hi Peter,

Take a look here:

http://bizsupport1.austin.hp.com/bizsupport/TechSupport/Document.jsp?lang=en&cc=us&taskId=110&prodSeriesId=3204147&prodTypeId=18964&objectID=c01671212

Rgds,

[RickT_1]

Peter,

There is a patch that fixes that problem,

PHSS 34428 for HP-UX 11.11


Rick

[Peter Lachnitt]

Hi,

thank you for your answer.
I´ve checked /etc/passwd ;user sfmdb has an entry with user ID 103. I´ve stopped and start /opt/sfmdb/pgsql/bin/postmaster process and cimserver anyway.
But arround 15 minutes cimprovagt shows 86% cpu load.
WBEMSvcs Release is A.02.05.08; it´s newer than PHSS_34428.

Do you have any other suggestions?
Thanks for your help

Regards Peter

[Peter Lachnitt]

Hi,

for all with a problem like this.
HP has a new version of SysFaultMgmt who solves this problem.
SysFaultMgmt -A.04.04.02.01
works fine.
Look at
https://h20392.www2.hp.com/portal/swdepot/try.do?productNumber=SysFaultMgmt

Regards
Peter

[Peter Lachnitt]

Resolved. see comment