HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
System Administration
cancel
Showing results for 
Search instead for 
Did you mean: 

hpux 11.23 & 11.31 - snmpv3 startup

 
SOLVED
Go to solution
JayroSaycon
Occasional Advisor

hpux 11.23 & 11.31 - snmpv3 startup

Hello Everyone,

 

Some help needed, I have configured snmpv3 in hpux. I installed Net-snmp which is required to run the snmpv3.

 

So now, to be able to startup snmpv3, this is the run script that need to be trigger to startup the service: (i manually triggered it during after restart of server)

 

# /opt/iexpress/net-snmp/sbin/snmpd

 

# ps -ef |grep snmp
root 16027 1 0 Feb 20 ? 1860:47 /opt/iexpress/net-snmp/sbin/snmpd
root 6642 20110 0 16:14:54 pts/1 0:00 grep snmp

 

 

**My query is how to make this run script able to startup or run every after reboot of the server.

 Or what is the best way to add this permanently and survive during every reboot. 

 

Thanks in advance for your usual help.!

1 REPLY
Torsten.
Acclaimed Contributor
Solution

Re: hpux 11.23 & 11.31 - snmpv3 startup

see

http://h30499.www3.hp.com/t5/System-Administration/Installing-Net-SNMP-on-HP-UX/td-p/4308719#.UzvOalfRjoE

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!