cancel
Showing results for 
Search instead for 
Did you mean: 

hpux installation

SOLVED
Go to solution
whiz_kid911
Frequent Advisor

hpux installation

hi

am installing hpux using the virtual media in a rx2800 server...the installation is in the below screen for the past almost 2 hours now ....is it normal to be at there for so long ?

 

Press Any Key to interrupt Autoboot
\EFI\BOOT\AUTO ==> boot :IINSTALL
Seconds left till autoboot -   0
AUTOBOOTING...
- - - - - - - - - - - - Live Console - - - - - - - - - - - -
> System Memory = 16363 MB
loading section 0
................................................................................
loading section 1
................................................. (complete)
loading symbol table
loading ram disk file (:IINSTALLFS).
.....................................................................................................................
 (complete)
Launching :IINSTALL
SIZE: Text:62774K + Data:24694K + BSS:31259K = Total:118728K

 

1 REPLY
Torsten.
Acclaimed Contributor
Solution

Re: hpux installation

The reason is maybe a wrong console setting or the media reease is too old.

 

Go to EfI and check "conconfig".

 

 

BTW, don't forget to create a hardware RAID!


Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!