1748219 Members
4344 Online
108759 Solutions
New Discussion юеВ

ignite-UX

 
gany59
Regular Advisor

ignite-UX

How to restore the ignite in the PA-RISC and itanium, is the procedure is same or different,
what is the log files of the ignite
3 REPLIES 3
Fabian Brise├▒o
Esteemed Contributor

Re: ignite-UX

Hello Gany.
Question
1. pa-risc: boot of a dvd or tape or LAN boot., once this is done follow on screen instructions.

2. Itanium boot of a DVD or LAN boot, boot of tape is not supported on itanium (as far as I know), boot of a DVD has to be configured in EFI shell.

3. I never had the need to recover an itanium server, but I suppose it's the same.

4. try the following path for log files
/var/opt/ignite/recovery

Hope this helps. Have a great day.

Knowledge is power.
Steven E. Protter
Exalted Contributor

Re: ignite-UX

Shalom,

To restore an entire system the procedure is different.

To extract a single file, its just a tar command.

Note: You can not restore an HP-UX 11.11 Ignite backup, which is a PA-RISC only OS to a IA-64 Itanium based system.

Some applications like Oracle for 11.23 have different versions for PA-RISC versus IA-64 and therefore software reinstall might be needed.

More details would assist in getting you better help.

SEP
Steven E Protter
Owner of ISN Corporation
http://isnamerica.com
http://hpuxconsulting.com
Sponsor: http://hpux.ws
Twitter: http://twitter.com/hpuxlinux
Founder http://newdatacloud.com
Michal Kapalka (mikap)
Honored Contributor

Re: ignite-UX

hi,

check the information on this website :

http://www.hp.com/go/ignite-ux

there are documents :

Ignite-UX Installation Booting


And one remark :

on the itanium / Pa-risc is possible boot the ignite from the tape, made it several times, its depend on the ignite version and of corse of the firmwar, inside you server.


mikap