info for PA-RISC

[Bill Hassell]

print_manifest is part of the Ignite package so you have Ignite installed. But to answer your question, just run this command:

echo "selclass qualifier all;info;wait;infolog" | /usr/sbin/cstm

This will give you a *LOT* more than you probably wanted, but it is complete.

[Steven E. Protter]

Shalom,

Ignite is a basic part of any HP-UX server.

You have been advised to install it to use print_manifest.

There is no need to back up or recover your server to use this tool.

However it should be pointed out: If this server has any purpose at all and does any meaningful work, you are not doing your job as a sysadmin by not using Ignite to back it up.

I can say though I'm currently now working, in the past, Ignite saved several servers of mine and my job on more than one occasion.

You SHOULD be using Ignite.

End lecture.

SEP

[Kranti Mahmud]

Hi gany59

=> i need the my server information like serial no, no.of cores in a processor==>

==> U can check all the information of he server by running the nickel script. Please find the script with the procedure.

Rgds-Kranti

[Kranti Mahmud]

Hi gany59,

From nickel.tar.gz check the cstm.html file for the server information like serial no, no.of cores in a processor.


Rgds-Kranti