System Administration
cancel
Showing results for 
Search instead for 
Did you mean: 

installation procedure for disks in as1200

Jayesh Thakar
Occasional Contributor

installation procedure for disks in as1200

I want to install tru64 version 4.0f on Alphaserver 1200 on 36 GB with raid5. Kindly suggest the recommended procedure for the same.
3 REPLIES
Mark Poeschl_2
Honored Contributor

Re: installation procedure for disks in as1200

See Tru64 4.0F Installation Guide at:

http://h30097.www3.hp.com/docs/base_doc/DOCUMENTATION/V40F_HTML/AQTLGCTE/TITLE.HTM

As for the RAID level, do you have a hardware RAID controller? Configuring it is typically done at the console level before you ever get to the OS install. If you want software RAID you'll need LSM (Logical Storage Manager) in addition to the base Tru64 license. If you have only a single physical drive, this could prove very difficult, if not impossible.
Ivan Ferreira
Honored Contributor

Re: installation procedure for disks in as1200

You can use:

512-1G to /

Swap at least = RAM or 2 x RAM acording to your memory and software requirements.

The usr_domain the rest of the disk.

You can then create more filesets in the usr_domain for backup/quota/data separation purposes.

Put /tmp on a separate filesytem, may share the usr_domain.
Por que hacerlo dificil si es posible hacerlo facil? - Why do it the hard way, when you can do it the easy way?
Raj D.
Honored Contributor

Re: installation procedure for disks in as1200

Hi Jayesh ,

Here is the book you are looking for ,
And having details steps for tru64 V4.0F installation process,

http://h30097.www3.hp.com/docs/base_doc/DOCUMENTATION/V40F_PDF/AQTLGCTE.PDF

Hope this can help ,

Cheers,
Raj
" If u think u can , If u think u cannot , - You are always Right . "