ioscan -fnC tape hangs and ioscan -kfnCtape shows "SCAN" in Hardware state

[T G Manikandan]

can you please attach the syslog.log

[sujit kumar singh]

Hi Mani,


I am attaching the syslogs for the rx6600 server. Please have a look.


regards
sujit

[sujit kumar singh]

Hi

Doubting the MSL 6060 which has the NSR card a MSL 4048 was put and zoned with the servers , MSL 4048 now being detected and backups are occuring on the SUN hosts as well as the IVMguests are OK Now.
Also have asked the customer to take a restart of the VM Guests and VM hosts asap after planning an outage of the application and informing the Application owners.

Thanks for all the help SEP,Torsten, Mani.

Shall be following the recommendations from Torsten to use the INDEXED map in the NSR.

regards
sujit

[Torsten.]

According to the user manual the auto assigned map may cause problems with hp-ux, so switch it to indexed.

[Suraj K Sankari]

Hi SKS,

Did you reboot all the VM.....
what is the status is everything ok

Suraj

[sujit kumar singh]

We could not do much with the TL 6060, We had given the CU an MSL4048 for backup, Which was working well with 2 drives, Only zoining done accordingly and there was no problems in detection even on the IVM hosts/guests!!!


Yesterday we got the replacement of the MSL8096 that was customers original TL and just putting in that TL and zoning refreshed, all is now OK and well.


Thanks a lot for the Inputs everyone.

We did not reboot the IVM host and/or Guests.


regards
sujit

[sujit kumar singh]

HI all ,


Thanks again, Closing ..
regards
sujit