lan card status check

[rajesh73]

i need command for below mentioned query

1.how many lan card connected in this server

2.what is the lan card status of this server

[Bill Hassell]

>> 1.how many lan card connected in this server

netstat -in

for example:

Name      Mtu  Network         Address         Ipkts              Ierrs Opkts              Oerrs Coll
lan1      1500 10.11.10.0      10.11.10.215    8419648            0     14439472           0     0
lan0      1500 10.11.10.0      10.11.10.210    5802811            0     5163360            0     0
lo0      32808 127.0.0.0       127.0.0.1       372083             0     372082             0     0
lan0:1  1500 10.11.10.0      10.11.10.213    100                0     100                0     0

>> 2.what is the lan card status of this server

lanscan

 For example:

# lanscan
Hardware Station Crd Hdw Net-Interface NM MAC HP-DLPI DLPI
Path Address In# State NamePPA ID Type Support Mjr#
0/1/2/0 0x0017A4AB5467 0 UP lan0 snap0 1 ETHER Yes 119
0/2/1/0/6/0 0x0015605E7150 3 UP lan3 snap3 2 ETHER Yes 119
0/3/1/0/6/0 0x00306E4CCEAD 2 UP lan2 snap2 3 ETHER Yes 119
0/1/2/1 0x0017A4AB5466 1 UP lan1 snap1 4 ETHER Yes 119  
LinkAgg0 0x000000000000 900 DOWN lan900 snap900 6 ETHER Yes 119
LinkAgg1 0x000000000000 901 DOWN lan901 snap901 7 ETHER Yes 119
LinkAgg2 0x000000000000 902 DOWN lan902 snap902 8 ETHER Yes 119
LinkAgg3 0x000000000000 903 DOWN lan903 snap903 9 ETHER Yes 119
LinkAgg4 0x000000000000 904 DOWN lan904 snap904 10 ETHER Yes 119

and also:  lanadmin -g #

where # is lan# 

For example:

# lanadmin -g 0

LAN INTERFACE STATUS DISPLAY
Sat, Jan 4,2014 19:52:16
PPA Number = 0
Description = lan0 HP PCI-X 1000Base-T Release B.11.31.1112
Type (value) = ethernet-csmacd(6)
MTU Size = 1500
Speed = 1000000000
Station Address = 0x17a4ab5467
Administration Status (value) = up(1)
Operation Status (value) = up(1)
Last Change = 453
Inbound Octets = 167433734
Inbound Unicast Packets = 82332
Inbound Non-Unicast Packets = 811459
Inbound Discards = 0
Inbound Errors = 0
Inbound Unknown Protocols = 2100
Outbound Octets = 14571358
Outbound Unicast Packets = 364
Outbound Non-Unicast Packets = 73271
Outbound Discards = 0
Outbound Errors = 0
Outbound Queue Length = 0
Specific = 655367
Ethernet-like Statistics Group
Index = 1
Alignment Errors = 0
FCS Errors = 0
Single Collision Frames = 0
Multiple Collision Frames = 0
Deferred Transmissions = 0
Late Collisions = 0
Excessive Collisions = 0
Internal MAC Transmit Errors = 0
Carrier Sense Errors = 0
Frames Too Long = 0
Internal MAC Receive Errors = 0

[nnrao1502]

if it is  HP-UX 11-31  run command  nwmgr . It  will show  which  lan cards  can communicate  outside network