cancel
Showing results for 
Search instead for 
Did you mean: 

lan card status check

rajesh73
Super Advisor

lan card status check

i need command for below mentioned query

 

1.how many lan card connected in this server

 

2.what is the lan card status of this server

2 REPLIES
Bill Hassell
Honored Contributor

Re: lan card status check

>> 1.how many lan card connected in this server

 

netstat -in

 

for example:

 

Name      Mtu  Network         Address         Ipkts              Ierrs Opkts              Oerrs Coll
lan1      1500 10.11.10.0      10.11.10.215    8419648            0     14439472           0     0
lan0      1500 10.11.10.0      10.11.10.210    5802811            0     5163360            0     0
lo0      32808 127.0.0.0       127.0.0.1       372083             0     372082             0     0
lan0:1  1500 10.11.10.0      10.11.10.213    100                0     100                0     0

 

 

>> 2.what is the lan card status of this server

 

lanscan

 For example:

 

# lanscan
Hardware Station Crd Hdw Net-Interface NM MAC HP-DLPI DLPI
Path Address In# State NamePPA ID Type Support Mjr#
0/1/2/0 0x0017A4AB5467 0 UP lan0 snap0 1 ETHER Yes 119
0/2/1/0/6/0 0x0015605E7150 3 UP lan3 snap3 2 ETHER Yes 119
0/3/1/0/6/0 0x00306E4CCEAD 2 UP lan2 snap2 3 ETHER Yes 119
0/1/2/1 0x0017A4AB5466 1 UP lan1 snap1 4 ETHER Yes 119  
LinkAgg0 0x000000000000 900 DOWN lan900 snap900 6 ETHER Yes 119
LinkAgg1 0x000000000000 901 DOWN lan901 snap901 7 ETHER Yes 119
LinkAgg2 0x000000000000 902 DOWN lan902 snap902 8 ETHER Yes 119
LinkAgg3 0x000000000000 903 DOWN lan903 snap903 9 ETHER Yes 119
LinkAgg4 0x000000000000 904 DOWN lan904 snap904 10 ETHER Yes 119

 

and also:  lanadmin -g #

where # is lan# 

 

For example:

 

 

# lanadmin -g 0

LAN INTERFACE STATUS DISPLAY Sat, Jan 4,2014 19:52:16 PPA Number = 0 Description = lan0 HP PCI-X 1000Base-T Release B.11.31.1112 Type (value) = ethernet-csmacd(6) MTU Size = 1500 Speed = 1000000000 Station Address = 0x17a4ab5467 Administration Status (value) = up(1) Operation Status (value) = up(1) Last Change = 453 Inbound Octets = 167433734 Inbound Unicast Packets = 82332 Inbound Non-Unicast Packets = 811459 Inbound Discards = 0 Inbound Errors = 0 Inbound Unknown Protocols = 2100 Outbound Octets = 14571358 Outbound Unicast Packets = 364 Outbound Non-Unicast Packets = 73271 Outbound Discards = 0 Outbound Errors = 0 Outbound Queue Length = 0 Specific = 655367 Ethernet-like Statistics Group Index = 1 Alignment Errors = 0 FCS Errors = 0 Single Collision Frames = 0 Multiple Collision Frames = 0 Deferred Transmissions = 0 Late Collisions = 0 Excessive Collisions = 0 Internal MAC Transmit Errors = 0 Carrier Sense Errors = 0 Frames Too Long = 0 Internal MAC Receive Errors = 0

 

 

 

 

 

 

 



Bill Hassell, sysadmin
nnrao1502
Occasional Advisor

Re: lan card status check

if it is  HP-UX 11-31  run command  nwmgr . It  will show  which  lan cards  can communicate  outside network