Operating System - HP-UX
1748184 Members
3923 Online
108759 Solutions
New Discussion

Re: RAID drive failed error message

 
Torsten.
Acclaimed Contributor

Re: RAID drive failed error message

Did you replace the disk?

With server powered off?

What is the "sautil" output now?

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Aamir14
Regular Advisor

Re: RAID drive failed error message

Hi,

 

This is my sautil output.

 

prodata2#sautil /dev/ciss0 |more

******************************************************************************
****                                                                      ****
****             S A U T I L   S u p p o r t   U t i l i t y              ****
****                                                                      ****
****             for the HP SmartArray RAID Controller Family             ****
****                                                                      ****
****                           version A.02.13                            ****
****                                                                      ****
****  (C) Copyright 2003-2007 Hewlett-Packard Development Company, L.P.   ****
******************************************************************************



---- DRIVER INFORMATION ------------------------------------------------------

  Driver State........................ READY

---- CONTROLLER INFORMATION --------------------------------------------------

  Controller Product Number........... P400
  Controller Product Name............. HP PCIe SmartArray P400
  Hardware Path....................... 0/6/0/0/0/0/4/0/0/0
  Device File......................... /dev/ciss0
  Hardware Revision................... 'E'
  Boot Block Revision................. 0.03
  Firmware Revision (running)......... 5.20
  Firmware Revision (in ROM).......... 5.20
  Firmware Revision (inactive)........ 5.22
  # of Logical Drives................. 1
  # of Physical Disks Configured...... 2
  # of Physical Disks Detected........ 1
  Logical Drive Rebuild Priority...... 0   (low)
  Array Capacity Expansion Priority... 0   (low)
  Auto-Fail Missing Disks at Boot..... disabled
  SCSI Transfer Detection Mode........ Auto Detect
  Controller Path Selection Method.... default


---- ARRAY ACCELERATOR (CACHE) INFORMATION -----------------------------------

  Array Accelerator Board Present?.... yes
  Cache Configuration Status.......... cache enabled
  Cache Ratio......................... 25% Read / 75% Write
  Total Cache Size (MB)............... 208
    Read Cache........................ 052
    Write Cache....................... 156
    Transfer Buffer................... 000
  Battery Pack Count.................. 1
  Battery Status (pack #1)............ ok


---- LOGICAL DRIVE SUMMARY ---------------------------------------------------

       #   RAID      Size        Status

       0   1+0      139979 MB    USING INTERIM RECOVERY MODE


---- SAS/SATA DEVICE SUMMARY -------------------------------------------------

  Location  Ct Enc Bay       WWID           Type        Capacity Status

  internal  2I   1   8  0x500000e01e9a0362  DISK       146.8 GB  OK
  N/A       2I   1   7  0x500000e01e9a1dd2  N/A        N/A       FAILED


---- SAS/SATA ENCLOSURE SUMMARY ----------------------------------------------

  Location  Ct   Enc  Expander_count    Bay_count     SEP_count

  internal  1I   1    0                 4             1
  internal  2I   1    0                 4             1


---- LOGICAL DRIVE 0 ---------------------------------------------------------

  Logical Drive Device File........... c0t0d0
  Fault Tolerance Mode................ RAID 1+0 (Disk Mirroring)
  Logical Drive Size.................. 139979 MB
  Logical Drive Status................ USING INTERIM RECOVERY MODE
  # of Participating Physical Disks... 2

  Participating Physical Disk(s)...... Ct:Enc:Bay:WWID
                                       2I:1:8:0x500000e01e9a0362
                                       2I:1:7:0x500000e01e9a1dd2 <-- NOT RESPONDING

  Participating Spare Disk(s)......... Ct:Enc:Bay:WWID
                                       none

  Stripe Size......................... 128 KB
  Logical Drive Cache Status.......... cache enabled
  Configuration Signature............. 0xA9CAF724
  Media Exchange Detected?............ no


---- SAS/SATA DEVICE 2I:1:8:0x500000e01e9a0362 [DISK] ------------------------

  Connector Location............................... internal
  Connector........................................ 2I
  Enclosure........................................ 1
  Bay.............................................. 8
  WWID............................................. 0x500000e01e9a0362
  Device Type...................................... DISK
  Disk Capacity.................................... 146.8 GB
  Device Status.................................... OK
  Device Vendor ID................................. HP
  Device Product ID................................ DG146BABCF
  Device Serial Number............................. BS05P8C0S3800851
  Device Firmware Version.......................... HPD6
  Reserved Area (cfg/status info).................. 33554.4 KB (33.6 MB)
  Block Size (bytes/sector)........................ 512 bytes
  M&P Data Stamped?................................ yes
  Last Failure Reason.............................. none

  Physical Disk Flags:
    Disk present and operational................... yes
    Non-disk device detected....................... no

    S.M.A.R.T. supported........................... yes
    S.M.A.R.T. errors (in factory M&P data)........ no
    S.M.A.R.T. enabled............................. yes
    S.M.A.R.T. errors (in powerup M&P data)........ no
    Attached to external connector................. no
    Configured in a logical drive.................. yes
    Configured as a spare disk..................... no
    Disk write cache enabled at spin up............ no

    Supports redundant controller operation........ yes
    Disk write cache enabled in current page....... no
    Disk write cache disabled in default page...... yes

 

Thanks

Aamir

 

 

 

 

Torsten.
Acclaimed Contributor

Re: RAID drive failed error message

If not done already, replace the disk now online, post sautil output after the replacement.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Aamir14
Regular Advisor

Re: RAID drive failed error message

Hi Torsen,

Another server i have Seven disk

and all disk are used but my client says findout the one disk on the server.and formated the perticular

disk.

 

after formated replace the disk to faulty server disk.

 

So,Please see my another server details.

 

and help me  it is possible without harddisk formated.

 

 

 

 

appsdev1#ioscan -funC disk
Class     I  H/W Path     Driver S/W State   H/W Type     Description
=====================================================================
disk      4  0/6/0/0/0/0/4/0/0/0.0.0  sdisk   CLAIMED     DEVICE       HP      LOGICAL VOLUME
                         /dev/dsk/c0t0d0     /dev/rdsk/c0t0d0
                         /dev/dsk/c0t0d0s1   /dev/rdsk/c0t0d0s1
                         /dev/dsk/c0t0d0s2   /dev/rdsk/c0t0d0s2
                         /dev/dsk/c0t0d0s3   /dev/rdsk/c0t0d0s3
disk      3  0/6/0/0/0/0/4/0/0/0.0.1  sdisk   CLAIMED     DEVICE       HP      LOGICAL VOLUME
                         /dev/dsk/c0t0d1   /dev/rdsk/c0t0d1
disk      5  0/6/0/0/0/0/4/0/0/0.0.2  sdisk   CLAIMED     DEVICE       HP      LOGICAL VOLUME
                         /dev/dsk/c0t0d2   /dev/rdsk/c0t0d2
disk     11  255/1/0.0.0  sdisk   CLAIMED     DEVICE       TEAC    DVD-ROM DW-224EV
                         /dev/dsk/c1t0d0   /dev/rdsk/c1t0d0
appsdev1#
appsdev1#ioscan -m dsf
Persistent DSF           Legacy DSF(s)
========================================
/dev/rdisk/disk0         /dev/rdsk/c0t0d0
/dev/rdisk/disk0_p1      /dev/rdsk/c0t0d0s1
/dev/rdisk/disk0_p2      /dev/rdsk/c0t0d0s2
/dev/rdisk/disk0_p3      /dev/rdsk/c0t0d0s3
/dev/rdisk/disk6         /dev/rdsk/c0t0d1
/dev/rdisk/disk7         /dev/rdsk/c0t0d2
/dev/rdisk/disk12        /dev/rdsk/c1t0d0

 

 

 

                                                                     ****
****  (C) Copyright 2003-2007 Hewlett-Packard Development Company, L.P.   ****
******************************************************************************

 

---- DRIVER INFORMATION ------------------------------------------------------

  Driver State........................ READY

---- CONTROLLER INFORMATION --------------------------------------------------

  Controller Product Number........... P400
  Controller Product Name............. HP PCIe SmartArray P400
  Hardware Path....................... 0/6/0/0/0/0/4/0/0/0
  Device File......................... /dev/ciss0
  Hardware Revision................... 'E'
  Boot Block Revision................. 0.03
  Firmware Revision (running)......... 5.20
  Firmware Revision (in ROM).......... 5.20
  Firmware Revision (inactive)........ 5.22
  # of Logical Drives................. 3
  # of Physical Disks Configured...... 7
  # of Physical Disks Detected........ 7
  Logical Drive Rebuild Priority...... 0   (low)
  Array Capacity Expansion Priority... 0   (low)
  Auto-Fail Missing Disks at Boot..... disabled
  SCSI Transfer Detection Mode........ Auto Detect
  Controller Path Selection Method.... default


---- ARRAY ACCELERATOR (CACHE) INFORMATION -----------------------------------

  Array Accelerator Board Present?.... yes
  Cache Configuration Status.......... cache enabled
  Cache Ratio......................... 25% Read / 75% Write
  Total Cache Size (MB)............... 208
    Read Cache........................ 052
    Write Cache....................... 156
    Transfer Buffer................... 000
  Battery Pack Count.................. 1
  Battery Status (pack #1)............ ok


---- LOGICAL DRIVE SUMMARY ---------------------------------------------------

       #   RAID      Size        Status

       0   1+0      139979 MB    OK
       1   1+0      279964 MB    OK
       2   0        286070 MB    OK


---- SAS/SATA DEVICE SUMMARY -------------------------------------------------

  Location  Ct Enc Bay       WWID           Type        Capacity Status

  internal  1I   1   4  0x5000c5000fc99599  DISK       146.8 GB  OK
  internal  1I   1   3  0x5000c5000fc9e20d  DISK       146.8 GB  OK
  internal  1I   1   2  0x5000c5000a998e6d  DISK       300.0 GB  OK
  internal  2I   1   8  0x5000c5000fc9af65  DISK       146.8 GB  OK
  internal  2I   1   7  0x5000c5000fc9f46d  DISK       146.8 GB  OK
  internal  2I   1   6  0x5000c5000fc9f051  DISK       146.8 GB  OK
  internal  2I   1   5  0x5000c5000fc9eb3d  DISK       146.8 GB  OK


---- SAS/SATA ENCLOSURE SUMMARY ----------------------------------------------

  Location  Ct   Enc  Expander_count    Bay_count     SEP_count

  internal  1I   1    0                 4             1
  internal  2I   1    0                 4             1


---- LOGICAL DRIVE 0 ---------------------------------------------------------

 

 

Thanks

aamir

Torsten.
Acclaimed Contributor

Re: RAID drive failed error message

You want to take a disk from another server?

 

Which disks?

 

Your "sautil" output is incomplete, please send again.


Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Aamir14
Regular Advisor

Re: RAID drive failed error message

Hi,

 

 

Please see the full sautil output attached file.

 

 

 

Thanks

aamir

 

Torsten.
Acclaimed Contributor

Re: RAID drive failed error message

As you can see all disks are used, but disk in slot 2 has a RAID0 only.

Dou you want to remove this disk?

So you should first delete the LVM configuration and the RAID on this disk.

Is this what you want to do?

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Aamir14
Regular Advisor

Re: RAID drive failed error message

hi,

 

But
 bay 2 or slot 2 has 300 gb disk

and failed disk size is 146gb

but its size is different.

 

 

Enclosure........................................ 1
  Bay.............................................. 2
  WWID............................................. 0x5000c5000a998e6d  
  Device Type...................................... DISK       
  Disk Capacity.................................... 300.0 GB  
  Device Status.................................... OK        
  Device Vendor ID................................. HP

 

 

Thanks

Aamir

Torsten.
Acclaimed Contributor

Re: RAID drive failed error message

I don't know what you want to do ... please clarify.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Aamir14
Regular Advisor

Re: RAID drive failed error message

Hi,

 

my question is that slot 2 disk is 300gb

and faulty server disk size is 146gb

 

does size are matter?

 

and how to delete raid configuration on particular disk.

 

Thanks

aamir