lm_sensors ML110 G4

[Petr Sponer]

Does anybody know how to configure lm_sensors on ML110 G4 (Xeon 3040) ?
I was looking around in google and I have found nothing relevant :-(
Tnx for any advice.

[Stuart Browne]

What do you get out of a 'sensors-detect' ?

[irens]

Hi i have ML110G2 with P4 processor and ICH6 chipsets from intel.

lm_sensors can't show a sensors after command: sensors.

I use sensors-detect, it detect module to load:

To load everything that is needed, add this to some /etc/rc* file:

#----cut here----
# I2C adapter drivers
modprobe i2c-i801
modprobe i2c-isa
# I2C chip drivers
modprobe lm75
modprobe smbus-arp
# no driver for SMSC 47M15x/192 Super IO Fan Sensors yet
# sleep 2 # optional
/usr/bin/sensors -s # recommended
#----cut here----

After lm_sensors restart from /etc/init.d/ i can see only eeprom values, that i have 2 banks with 512Megs of each bank.

Oh, i use Centos 4 update 5 and kernel 2.6.9-55 SMP.

Any idea, how get things to work ?

[Stuart Browne]

Install the 'hpasm' RPM. That will give you fan speeds, zone temperatures, powersupply states, as well as the hardware event log content.

[irens]

I can'nt find pcakage for i386 arch only for x86_64/EMT.

Is hpasm in version for i386 systems.

I need for RHEL4 update 5 ...

[Stuart Browne]

Wow, odd.. Didn't know that there wasn't any for the ML110..

My apologies..