Operating System - HP-UX
1748227 Members
4252 Online
108759 Solutions
New Discussion юеВ

Re: lsof cpu/memory utilization is high

 
SOLVED
Go to solution
Hakki Aydin Ucar
Honored Contributor

Re: lsof cpu/memory utilization is high

I cannot say normal due to it depends on your system perfomance and capacity , and conditions like backup is running OR another performance issue effect this. But I remember more than 100% utily of rds in some customer. According to your CPU usage no cpu bottleneck yet, but 144% seems a bit high.

it reminds of something I faced in past,  I had solved similar issue with a missing linker patch ,but my hw was PA-RISC not Integrity..

Naj
Valued Contributor

Re: lsof cpu/memory utilization is high

Hi Hakki,

>I had solved similar issue with a missing linker patch
could you please more details on this,means after patch the process avg below 100%?


____________________________________________
:: Really appreciate if you could assign some points.
:: Don't know how to assign point? Click the KUDOS! star!
Hakki Aydin Ucar
Honored Contributor

Re: lsof cpu/memory utilization is high

>could you please more details on this,means after patch the process avg below 100%?
All I remember about similar issue (that is not same because my omni start got stuck with high rds not started and reached above 100%), but I saw %90 around in most of healthy systems. So , somehow 100% not indicates a problem directly as I said before. 

My solution was to put patch PHSS_41214 , watch out for this PA-RISC only !

I hope it igives some clue and my explanation makes sense.