cancel
Showing results for 
Search instead for 
Did you mean: 

make_tape_recovery

SOLVED
Go to solution
manuj kumar
Frequent Advisor

make_tape_recovery

Hello.

i've took one backup from a cluster server. mirrored disks was active.
then i am doing recovery now.
i saw only one harddisk is blinking so that i feel the mirror will not work.
any help.
3 REPLIES
Eric SAUBIGNAC
Honored Contributor
Solution

Re: make_tape_recovery

Bonjour,

If OS was mirrored with LVM Mirror, ignite doesn't mirror it back. Once your box will be restored, you will have to mirror again the whole vg00.

Eric
Torsten.
Acclaimed Contributor

Re: make_tape_recovery

The restore goes always to only 1 disk if the disks were mirrored by LVM.

You need to either restore the mirror manually or script this into the restore routine.

Hardware mirrors will stay mirrored, of course.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Ganesan R
Honored Contributor

Re: make_tape_recovery

Hi Manoj,

One advantage is that recovery will be fast if mirror disk not recovered.

You can manually recover the mirror disk later or change the post script to automate it.
Best wishes,

Ganesh.