System Administration
cancel
Showing results for 
Search instead for 
Did you mean: 

memory modules on DS25 TRU64 Unix V5.1B

SOLVED
Go to solution
Mustafa Aydinalp
Occasional Advisor

memory modules on DS25 TRU64 Unix V5.1B

Hi;

I have 3 GB installed (per node) DS25 cluster , and I want to know physical memory modules sizes that is installed on the machine (e.g : it can be 3x1GB installed or it can be 1x2GB + 1x1GB installed)
How can I check that info from command line or from a tool without powering off the machine? (vmstat output does not show this info)
see below from one node:

soft85 #vmstat -P|grep -i phy
Total Physical Memory = 3072.00 M
Physical Memory Clusters:
Physical Memory Use:
Total Physical Memory Use: 392554 / 3066.83M
2 REPLIES
Rob Leadbeater
Honored Contributor
Solution

Re: memory modules on DS25 TRU64 Unix V5.1B

Hi,

As far as I'm aware, it is not possible to get this information with the operating system running. You will have to shut down to the SRM prompt (P00>>>) and issue a "show mem" or "show config" (possibly "show fru")

The DS25 has 16 memory slots that make up 4 memory banks. Each bank can contain 512MB, 1GB, 2GB or 4GB.

http://h18002.www1.hp.com/alphaserver/options/asds25/asds25_1_1_options.html#OptListHead

http://h18002.www1.hp.com/products/quickspecs/11432_na/11432_na.html

Cheers,

Rob
Mustafa Aydinalp
Occasional Advisor

Re: memory modules on DS25 TRU64 Unix V5.1B

thanks for your explanation