cancel
Showing results for 
Search instead for 
Did you mean: 

mirror ux

 
SOLVED
Go to solution
himacs
Super Advisor

mirror ux

Hi admins,

M going to install mirror-UX in my B.11.23 server.Do we require a reboot post installation


regards
himacs
15 REPLIES 15
Michal Kapalka (mikap)
Honored Contributor

Re: mirror ux

Hi himacs,

check the instalation guide, on hp.com,

or before instalation, use -p option or,

read the readme from the depot.

mikap
avizen9
Esteemed Contributor

Re: mirror ux

Hello Himacs,

no it doesnt require reboot, once you install mirror you can verify by below command.

swlist -l bundle | grep -i mirror

here is output for this command
B2491BA B.11.11 MirrorDisk/UX

James R. Ferguson
Acclaimed Contributor
Solution

Re: mirror ux

Hi:

Installation of Mirrordisk/UX will require a reboot since kernel filesets are involved.

Regards!

...JRF...
avizen9
Esteemed Contributor

Re: mirror ux

ops, i was wrong,

James R. Ferguson thanks for correction, :)

Steven E. Protter
Exalted Contributor

Re: mirror ux

Shalom,

Last time I installed mirror/ux there was a reboot due to a kernel installation/recompile.

You should check if its really needed though. Most modern servers have hardware mirroring, and thats free, built into the P400 disk controller.

SEP
Steven E Protter
Owner of ISN Corporation
http://isnamerica.com
http://hpuxconsulting.com
Sponsor: http://hpux.ws
Twitter: http://twitter.com/hpuxlinux
Founder http://newdatacloud.com
himacs
Super Advisor

Re: mirror ux

Hi All,

Thanks for ur reply.

Actually i tried to install in preview mode

swinstall -p -s /mirror B2491BA -x codeword=CODEWORD and ended up below warnings.

The source "noortrg:/mirror" is a CD-ROM with part number
"5013-6495". This CD-ROM contains both protected and
unprotected software. No codeword or customer ID was entered
and no valid saved ones were found for this CD-ROM. A valid
codeword is not required to access unprotected software. To
find a valid codeword and customer ID, examine the CD-ROM
certificate which you received from HP for this CD-ROM. If you
need access to software on this CD-ROM which is currently
protected, rerun the command and use the "-x
codeword=CODEWORD" and "-x customer_id=CUSTOMER_ID" options to
enter the correct codeword and customer ID.

what does it mean?


regards
himacs

avizen9
Esteemed Contributor

Re: mirror ux



"rerun the command and use the "-x
codeword=CODEWORD" and "-x customer_id=CUSTOMER_ID" options to
enter the correct codeword and customer ID"

this error related to some license issue, looks you dont have a license version for hpux mirror.

Basheer_2
Trusted Contributor

Re: mirror ux

Just do a preview install and read the Description.

swinstall -p -s /opt/software/

this will take you to sam install and you will see few columns on the right. one of them is Description. Select this and scroll down on the left column, at the bottom you will under Reboot
RajuD
Frequent Advisor

Re: mirror ux

MirrorDisk/UX is not a free software, it need to be purchased from hp if your os doesnt cointain, they will provide codeword or id to install if you purchase seperately.
“Education is our passport to the future, for tomorrow belongs to those who prepare for it today.”