1745909 Members
4022 Online
108723 Solutions
New Discussion юеВ

Re: mkisofs 11iv3

 
SOLVED
Go to solution
merieux
Frequent Advisor

mkisofs 11iv3

Hello ,

I need to do an iso image on HP-UX? In the previous version of HP-UX 11iv1 et 11iV2 a command mkisofs existed. It came from the package HP-UX dvd+rw-tools. It seems this package is not available for 11iV3 . Do you know if HP-UX provide another command to do that? or perhaps another package ?
Thank you for you replies .
Regards ,
Xavier
4 REPLIES 4
Vivek Bhatia
Trusted Contributor

Re: mkisofs 11iv3

HI Merieux,

Create HP-UX 11i v3 bootable CD/DVD media for two-step media recovery
On a system with a CD/DVD writer and the same version of Ignite-UX as on your tape, execute the following command (iso_directory is the target directory for the .iso media file and the -r option specifies the release, such as B.11.23 or B.11.31):


#make_media_install -r B.11.31 -m iso_directory

Have a look at the link below.

http://www.docs.hp.com/en/5992-5309/ch14s03.html

And dont forget to give the points.

Regards,
Vivek
Steven E. Protter
Exalted Contributor
Solution

Re: mkisofs 11iv3

Shalom,

This doc would seem to indicate its part of Ignite which is available at http://software.hp.com

http://docs.hp.com/en/5992-3336/ch12s03.html

http://docs.hp.com/en/5992-3336/5992-3336.pdf

SEP
Steven E Protter
Owner of ISN Corporation
http://isnamerica.com
http://hpuxconsulting.com
Sponsor: http://hpux.ws
Twitter: http://twitter.com/hpuxlinux
Founder http://newdatacloud.com
merieux
Frequent Advisor

Re: mkisofs 11iv3

thank your for your reply
Steven Schweda
Honored Contributor

Re: mkisofs 11iv3

If you actually want mkisofs, it's part of
the cdrtools package. I normally look in

ftp://ftp.berlios.de/pub/cdrecord/alpha/

and fetch the latest source kit. Older,
released versions are not far away.