HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
System Administration
cancel
Showing results for 
Search instead for 
Did you mean: 

modify autonegotiation in HPUX

 
ArYa-2
Occasional Contributor

modify autonegotiation in HPUX

How to modify autonegotiation in HPUX
4 REPLIES
G V R Shankar
Valued Contributor

Re: modify autonegotiation in HPUX

G V R Shankar
Valued Contributor

Re: modify autonegotiation in HPUX

rick jones
Honored Contributor

Re: modify autonegotiation in HPUX

Presuming you want to hardcode a duplex setting, before you do that, make triply certain that it is really necessary. HP-UX NICs/drivers autoneg quite effectively, and in this day and age there should be no kit out there which cannot autonegotiate.
there is no rest for the wicked yet the virtuous have no pillows
Tingli
Esteemed Contributor

Re: modify autonegotiation in HPUX

For a temp solution, you can use command:

lanadmin -X auto_on ppa#

For a perm, you need to modify the nic configuration file under /etc/rc.config.d/