Operating System - HP-UX
1753672 Members
5710 Online
108799 Solutions
New Discussion юеВ

my problem is not resolved

 
S.KICHOU
Occasional Advisor

my problem is not resolved

thank you for answering me, my problem is not resolved


#echo $DISPLAY
172.19.21.144:0.0


#DISPLAY=172.19.21.144:0.0


#export DISPLAY


#gpm
Connecting to Display...
Error: Can't open display: 172.19.21.144:0.0
Error: Couldn't find per display information
9 REPLIES 9

Re: my problem is not resolved

You should continue this in your old post, not create a new one...

So presumably 172.19.21.144 is the IP address of your PC? And you are running some sort of X windows server software on it?

HTH

Duncan

I am an HPE Employee
Accept or Kudo
S.KICHOU
Occasional Advisor

Re: my problem is not resolved

I did not install this tool

Re: my problem is not resolved

So how are you accessing the HP-UX server? Do you have any sort of graphical console available to you?

If not, you can't run the GUI version of glance, you'll just have to use the character version, by typing:

# glance


HTH

Duncan

I am an HPE Employee
Accept or Kudo
S.KICHOU
Occasional Advisor

Re: my problem is not resolved

thank you for answering me. I seen it used GlancePlus by more explicit but it works very well with #glance
Torsten.
Acclaimed Contributor

Re: my problem is not resolved

See your other thread:


http://forums.itrc.hp.com/service/forums/questionanswer.do?threadId=1482375

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
S.KICHOU
Occasional Advisor

Re: my problem is not resolved


hello

system HP UX 32G RAM ET 4 PROCESS

how to identify the tools used to monitor server performance
how to identify bottlenecks ( les goulots d├в ├Г┬йtranglements ) and potential problems
how to determine appropriate actions to remedy problems


Laurent Menase
Honored Contributor

Re: my problem is not resolved

glance and glance adviser mode are usually good tools to start


Else if you want to use gpm from a PC
you need to hae a X server on your PC.
if under windows, you can use
-cygwin Xserver
-reflexionX
...

if you are under linux, just add remote connections to X server

Also you need to execute "xhost +"
to permit X11 accesses.
S.KICHOU
Occasional Advisor

Re: my problem is not resolved

HELLO

thank you for your reply. I want to use to manage my system HP UX WITH GlancePlus . is that I can find explanation regarding the interface GlancePlus



.thank you0.
Michael Sillers
Trusted Contributor

Re: my problem is not resolved

Take a look at this thread...
http://h30499.www3.hp.com/t5/ITRC-OV-Performance-Management/HPUX-GlancePlus/m-p/2785170#M1651
It's a little old but it should help you find some of the information you need.