Operating System - HP-UX
1748104 Members
4496 Online
108758 Solutions
New Discussion юеВ

Re: my problem is not resolved

 
S.KICHOU
Occasional Advisor

my problem is not resolved

thank you for answering me, my problem is not resolved


#echo $DISPLAY
172.19.21.144:0.0


#DISPLAY=172.19.21.144:0.0


#export DISPLAY


#gpm
Connecting to Display...
Error: Can't open display: 172.19.21.144:0.0
Error: Couldn't find per display information
9 REPLIES 9

Re: my problem is not resolved

You should continue this in your old post, not create a new one...

So presumably 172.19.21.144 is the IP address of your PC? And you are running some sort of X windows server software on it?

HTH

Duncan

I am an HPE Employee
Accept or Kudo
S.KICHOU
Occasional Advisor

Re: my problem is not resolved

I did not install this tool

Re: my problem is not resolved

So how are you accessing the HP-UX server? Do you have any sort of graphical console available to you?

If not, you can't run the GUI version of glance, you'll just have to use the character version, by typing:

# glance


HTH

Duncan

I am an HPE Employee
Accept or Kudo
S.KICHOU
Occasional Advisor

Re: my problem is not resolved

thank you for answering me. I seen it used GlancePlus by more explicit but it works very well with #glance
Torsten.
Acclaimed Contributor

Re: my problem is not resolved

See your other thread:


http://forums.itrc.hp.com/service/forums/questionanswer.do?threadId=1482375

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
S.KICHOU
Occasional Advisor

Re: my problem is not resolved


hello

system HP UX 32G RAM ET 4 PROCESS

how to identify the tools used to monitor server performance
how to identify bottlenecks ( les goulots d├в ├Г┬йtranglements ) and potential problems
how to determine appropriate actions to remedy problems


Laurent Menase
Honored Contributor

Re: my problem is not resolved

glance and glance adviser mode are usually good tools to start


Else if you want to use gpm from a PC
you need to hae a X server on your PC.
if under windows, you can use
-cygwin Xserver
-reflexionX
...

if you are under linux, just add remote connections to X server

Also you need to execute "xhost +"
to permit X11 accesses.
S.KICHOU
Occasional Advisor

Re: my problem is not resolved

HELLO

thank you for your reply. I want to use to manage my system HP UX WITH GlancePlus . is that I can find explanation regarding the interface GlancePlus



.thank you0.
Michael Sillers
Trusted Contributor

Re: my problem is not resolved

Take a look at this thread...
http://h30499.www3.hp.com/t5/ITRC-OV-Performance-Management/HPUX-GlancePlus/m-p/2785170#M1651
It's a little old but it should help you find some of the information you need.