need to extend / for upgrade

[James E Robinson]

I need to upgrade from 11.11 to 11.23. I'm curious if / really needs to be increase from its current 200 MB to 429 MB as recommended by the upgrade manual for a cold install. I want to do a warm update to hopefully reduce my down time. I use the system for a 3rd party database that operates 24/7. My install is FOE on a RISC rp2405.

[Torsten. · Accepted solution]

Hi James,

200 MB may be a little too less.

The most safe way to extend it is doing an ignite backup and adjust sizes during restore.

Anyway, I would consider a cold install anyway for several reasons.

If you try an upgrade, make sure to have a good backup for fallback.

[Avinash20]

I am not sure, but the doc says to have atleast 1.25GB

http://www.docs.hp.com/en/5992-1978/ch02s02.html

"Disk Space Requirements for an Update"

[yulianto piyut]

i think for extend / (root filesystem) is impossible in hp-ux.

[Torsten.]

impossible is almost nothing, but better to use ignite.

;-)

[Md. Farhan A Azam]

Hi, check these threads...hope it will help you.

http://forums13.itrc.hp.com/service/forums/questionanswer.do?admit=109447627+1236951575726+28353475&threadId=687176

http://forums13.itrc.hp.com/service/forums/questionanswer.do?admit=109447627+1236951529656+28353475&threadId=1233547

Thnx...Farhan

[Ganesan R]

Hi James,

As everyone said ignite backup and restore is the preferred and supported way to extend the root filesystem. Take ignite backup with -I option for interactive restore.

#make_tape_backup -Av -I

Make sure that you have enough free PE's on root VG to extend the filesystems.

Also read that document to know the recommanded filesystem sizes for upgradation.

[James E Robinson]

Thank You all. It appears the right way is to use Ignite. I have plenty of room on vg00.

Best regards,
Jim