cancel
Showing results for 
Search instead for 
Did you mean: 

net0 interface

monu_1
Regular Advisor

net0 interface

Hi All,

#ifconfig net0
Link encap:Ethernet HWaddr 00:00:02:01:02:09
inet6 addr: fe80::200:2ff:fe01:209/64 Scope:Link
UP BROADCAST RUNNING SLAVE MULTICAST MTU:1500 Metric:1
RX packets:1810 errors:0 dropped:6879 overruns:0 frame:0
TX packets:311 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:111654 (109.0 KiB) TX bytes:0 (0.0 b)

#ethtool net0
net0 does not appear to be an ethernet device

Why it's not eth device? how can i change net0 duplex and speed setting?

Thanks & regards,
MKS
3 REPLIES
Matti_Kurkela
Honored Contributor

Re: net0 interface

If the interface's name is "net0", are you sure you're on a Linux machine? It looks more like SCO Unixware, not Linux.

What does "uname -a" say?

What kind of hardware is it? (If the "dmidecode" command is available, examine its output to find information about the manufacturer and model.)

MK
MK
skt_skt
Honored Contributor

Re: net0 interface

00:00:02 MAC belongs to Xerox.
Net0 looks like solaris

Please confirm
rico_cebiche
Advisor

Re: net0 interface

Notice that it shows as SLAVE, so probably you have a bonding configuration. Run a ifconfig -a and copy output here.