netstat output is corrupted

[mohelsayed]

Dear All
I was trying to move a production system from superdome rp to rp 4440. For some reason i had a lot of complication So i had to do a fresh installation on the rp 4440 and restore the ignite from the superdome manually using the tar command after fixing all the drivers the system with up snd running fine except the netestat command where its output is corrupted as you see below
root@billtd1:/> netstat -in
Name Mtu Network Address Ipkts Ierrs Opkts Oerrs Coll
lan1 1500 192.168.1.0 192.168.1.5 0 0 0 0 0
‰q€* 0 none none 6211 0 0 0 0
0 none none 0 0 0 0 0
1280262721 none none 4472118 0 860041281 0 0

[Steven E. Protter]

Shalom,

A superdome is a cell based system. The hardware used is nothing like that in an rp4440.

Ignite is not a supported tool to handle this migration.

Of the available tools, golden image has the best chance of success but with this radical a hardware difference, probably not.

Here is an approach that might work:

1) Cold install of the OS.
2) Install all major applications.
3) Migrate data to major applications.

SEP