System Administration
cancel
Showing results for 
Search instead for 
Did you mean: 

new EVA device for redhat linux

 
Johannes Bauer
Occasional Advisor

new EVA device for redhat linux

hello,

i tried to add a new eva device (assign lun 11) to a hp server running red hat linux.
works normally smooth and no problem
now i have the problem I see the device using lssg but there is no device in fdisk -l or lssd
anyone had already this problem??

thank you
[root@grzslx801 hp_fibreutils]# lssd
sda 0,0,2,1 COMPAQ HSV110 (C)COMPAQ 3110
sdb 0,0,2,2 COMPAQ HSV110 (C)COMPAQ 3110
sdc 0,0,2,3 COMPAQ HSV110 (C)COMPAQ 3110
sdd 0,0,2,4 COMPAQ HSV110 (C)COMPAQ 3110
sde 0,0,2,5 COMPAQ HSV110 (C)COMPAQ 3110
sdf 0,0,2,6 COMPAQ HSV110 (C)COMPAQ 3110
sdg 0,0,2,7 COMPAQ HSV110 (C)COMPAQ 3110
sdh 0,0,2,8 COMPAQ HSV110 (C)COMPAQ 3110
sdi 0,0,2,9 COMPAQ HSV110 (C)COMPAQ 3110
sdj 0,0,2,10 COMPAQ HSV110 (C)COMPAQ 3110
[root@grzslx801 hp_fibreutils]# lssg
sg0 0,0,0,0 COMPAQ HSV110 (C)COMPAQ 3110
sg1 0,0,1,0 COMPAQ HSV110 (C)COMPAQ 3110
sg2 0,0,2,0 COMPAQ HSV110 (C)COMPAQ 3110
sg3 0,0,2,1 COMPAQ HSV110 (C)COMPAQ 3110
sg4 0,0,2,2 COMPAQ HSV110 (C)COMPAQ 3110
sg5 0,0,2,3 COMPAQ HSV110 (C)COMPAQ 3110
sg6 0,0,2,4 COMPAQ HSV110 (C)COMPAQ 3110
sg7 0,0,2,5 COMPAQ HSV110 (C)COMPAQ 3110
sg8 0,0,2,6 COMPAQ HSV110 (C)COMPAQ 3110
sg9 0,0,2,7 COMPAQ HSV110 (C)COMPAQ 3110
sg10 0,0,2,8 COMPAQ HSV110 (C)COMPAQ 3110
sg11 0,0,2,9 COMPAQ HSV110 (C)COMPAQ 3110
sg12 0,0,2,10 COMPAQ HSV110 (C)COMPAQ 3110
sg13 0,0,2,11 COMPAQ HSV110 (C)COMPAQ 3110
sg14 0,0,3,0 COMPAQ HSV110 (C)COMPAQ 3110
sg15 1,0,0,0 COMPAQ HSV110 (C)COMPAQ 3110
sg16 1,0,1,0 COMPAQ HSV110 (C)COMPAQ 3110
sg17 1,0,2,0 COMPAQ HSV110 (C)COMPAQ 3110
sg18 1,0,4,0 COMPAQ HSV110 (C)COMPAQ 3110

Device Boot Start End Blocks Id System
/dev/sdh1 1 51200 52428784 83 Linux

Disk /dev/sdi: 53.6 GB, 53687091200 bytes
64 heads, 32 sectors/track, 51200 cylinders
Units = cylinders of 2048 * 512 = 1048576 bytes

Device Boot Start End Blocks Id System
/dev/sdi1 1 51200 52428784 83 Linux

Disk /dev/sdj: 53.6 GB, 53687091200 bytes
64 heads, 32 sectors/track, 51200 cylinders
Units = cylinders of 2048 * 512 = 1048576 bytes

Disk /dev/sdj doesn't contain a valid partition table

Disk /dev/cciss/c0d0: 36.3 GB, 36385505280 bytes
255 heads, 63 sectors/track, 4423 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes

Device Boot Start End Blocks Id System
/dev/cciss/c0d0p1 * 1 13 104391 83 Linux
/dev/cciss/c0d0p2 14 4423 35423325 8e Linux LVM
[root@grzslx801 hp_fibreutils]#

2 REPLIES
Ivan Ferreira
Honored Contributor

Re: new EVA device for redhat linux

You could try forcing a LIP, but normally, a reboot solves the problem.

http://solutions.qlogic.com/KanisaSupportSite/dynamickc.do?externalId=Post-2224043&sliceId=Post-2224043&command=show&forward=threadedKC&kcId=Post-2224043
Por que hacerlo dificil si es posible hacerlo facil? - Why do it the hard way, when you can do it the easy way?
Helmut Igl
Occasional Visitor

Re: new EVA device for redhat linux

reboot didn't change the situation, this is why i am surprised :-\
that won't be the end of it