cancel
Showing results for 
Search instead for 
Did you mean: 

not able to access vPar

 
Occasional Contributor

not able to access vPar

Please help me out. This problem is new to me. Not able to access one vpar. and there are two N/Ws. Primary is not pinging and backup is pinging. From consle i find the following errors also.

ddl_get_dynamic_attr: Could not do stat on path /dev/rdsk/c4t0d7
ddl_get_dynamic_attr: Could not do stat on path /dev/rdsk/c4t0d6
ddl_get_dynamic_attr: Could not do stat on path /dev/rdsk/c4t0d6
ddl_get_dynamic_attr: Could not do stat on path /dev/rdsk/c2t1d0
ddl_get_dynamic_attr: Could not do stat on path /dev/rdsk/c2t1d0
6 REPLIES 6
Respected Contributor

Re: not able to access vPar

Hi,

can u please check whts the status of server in vfp, check sl logs.
Whats the physical status of the disk of perticular server which ur not getting?

Regards
Vishnu Khandare
You should deserve before U desire!!!!
Valued Contributor

Re: not able to access vPar

Hi,

Did you run vparstatus from other node in same npar??

Is this vpar is new created??

"Not able to access one vpar

is through nework or both through nework and console??

Chandra
Occasional Contributor

Re: not able to access vPar

I have run the command "vparstatus -p vparname"
its showing vpar status is up.and through console or network also not able to login.i coundn't able to ping the vPAR.
Occasional Contributor

Re: not able to access vPar

It is vPar new created.
Trusted Contributor

Re: not able to access vPar

hi

post the output of vparstatus -v -p vparname


reagrds

MC
Honored Contributor

Re: not able to access vPar

If you can't access the vpar from console then it should be in hang status. You may need to TOC the vpar.

Regards.