cancel
Showing results for 
Search instead for 
Did you mean: 

npars/vpars

SOLVED
Go to solution
Grayh
Trusted Contributor

npars/vpars

The following document tells that only PA risc servers can be n partioned

http://h20000.www2.hp.com/bc/docs/support/SupportManual/c02029116/c02029116.pdf (BSC link updated by admin)

But noe pa risc servers are obselete..

I am confused.... Can i implement vpars/npars on integrity servers... If so how..

11.11 is again obselete...
7 REPLIES
Don Morris_1
Honored Contributor
Solution

Re: npars/vpars

nPars and vPars are both supported on Cell based Integrity servers. [I don't see how the document you cited gives you a different impression given sections like "Reconfiguring an nPartition (Integrity)"]

http://docs.hp.com/en/vse.html#nPartitions%20%28hardware-based%20partitioning%29

is where you want to go (until it migrates to BSC, anyway) for nPartition documentation.
Steven E. Protter
Exalted Contributor

Re: npars/vpars

Shalom,

11.11 is not obsolete. It is a supported OS until December 31, 2013.

HP has moved npar/vpar and HPVM to later, more current OS. I highly recommend the back end OS for either be 11.31, due to its later end of life date and more full throttled support from HP.

SEP
Steven E Protter
Owner of ISN Corporation
http://isnamerica.com
http://hpuxconsulting.com
Sponsor: http://hpux.ws
Twitter: http://twitter.com/hpuxlinux
Founder http://newdatacloud.com
Torsten.
Acclaimed Contributor

Re: npars/vpars

The following document tells that only PA risc servers can be n partioned

http://h20000.www2.hp.com/bc/docs/support/SupportManual/c02029116/c02029116.pdf (BSC link updated by admin)


Where? This is not true. I'm sure you misunderstood something.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
SoorajCleris
Honored Contributor

Re: npars/vpars

I am confused.... Can i implement vpars/npars on integrity servers...

If so how..??

You can implement as you implement it on PA-RISC server. Only differnce is if you are using vpar , you need to chage the mode if you want it boot to Npar.

And ofcourse the Npar will boot as an integrity server. You can load HP-UX 11.23 and 11.31 ( popular versions) and linux and windows.

Regards,
Sooraj
"UNIX is basically a simple operating system, but you have to be a genius to understand the simplicity" - Dennis Ritchie
melvyn burnard
Honored Contributor

Re: npars/vpars

Try reading further, namely Chapter 4 of:
http://h20000.www2.hp.com/bc/docs/support/SupportManual/c02018819/c02018819.pdf (BSC link updated by admin)
and Chapter 2 of:
http://h20000.www2.hp.com/bc/docs/support/SupportManual/c01868281/c01868281.pdf (BSC link updated by admin)
My house is the bank's, my money the wife's, But my opinions belong to me, not HP!
Basheer_2
Trusted Contributor

Re: npars/vpars

Yes you can have nPar/vPars in PA-RISC and IA

PA-RISC
Superdomes
RP8400/RP8420
RP7405/7410/7420

Integrity
Superdomes
RX8620/RX8640
RX7620/RX7640
Grayh
Trusted Contributor

Re: npars/vpars

Thank you