cancel
Showing results for 
Search instead for 
Did you mean: 

os installation error

kunjuttan
Super Advisor

os installation error

hi am facing a problem in installing hp-ux1131 os in rx2620
8 REPLIES
kunjuttan
Super Advisor

Re: os installation error

after booting from dvd,it is hanging in the following stage..

loading symbol table
loading System Directory (boot.sys) to MFS
....
loading MFSFILES directory (bootfs) to MFS
....................
Launching /stand/vmunix
SIZE: Text:29215K + Data:6540K + BSS:5215K = Total:40970K

even i dont know if it booting from the dvd or not..pls help me out...how to confirm whethr it is booting from dvd...and also yy ths error is happening??
Torsten.
Acclaimed Contributor

Re: os installation error

What console you are using?

Looks like you are on the wrong console.


Go to EFI and do

EFI> conconfig


Adjust if needed.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
kunjuttan
Super Advisor

Re: os installation error

hi,
i am trying to boot frm a dvd..in the boot manager prompt am selecting the internal dvd option..

after tht it is directly going to the abv mentioned place and hanaging ther..even if i am trying to boot frm harddisk..it is hanging in the same place..pls help me ..wht to do..??
Torsten.
Acclaimed Contributor

Re: os installation error

I told you what to do ...




If you are on the wrong console, you will just see NOTHING.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
kunjuttan
Super Advisor

Re: os installation error

i am connecting to mp through putty..am not getting wht to mean...nw how can i check in whch consol i am??
Torsten.
Acclaimed Contributor

Re: os installation error

Go to EFI and do

EFI> conconfig



console can be set to either serial or VGA.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Suraj E.M
Occasional Advisor

Re: os installation error

hello,

>even i dont know if it booting from the dvd or not..pls help me out...how to confirm whethr it is booting from dvd...and also yy ths error is happening??<

i beleive you have the MP access. then you can access the EFI Shell and can boot from the DVD.

check which are the boot options under EFI. if the DVD boot option is not listing you can add that with the ' Boot option maintenance menu'
try this.
Torsten.
Acclaimed Contributor

Re: os installation error

For using serial as console it should look like this:

Shell> conconfig

CONSOLE CONFIGURATION

Index Primary Type Device Path
----- ------- ----- ----------
1 P Serial Acpi(HWP0002,PNP0A03,0)/Pci(1|2)
2 S VGA Acpi(HWP0002,PNP0A03,0)/Pci(3|0)

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!