parmodify command from a vpar : question.

[RAJD1]

Hi Experts,

I am having 3 vpar  in npar#0 , I would liek to change the boot disk  right now it is pointing to  vpar1,  I want to chagne boot disk of npar to vpar2.

Is it possible to use parmodify command and to change the boot disk from sitting in the  vpar.

Thanks in advance.

[RAJD1]

Question :  from vpar1:>  can I run :  # parmodify -p 0 -b 2/1/1/0/2/0.6.0   

And then reconfiguration reboot. Is it going to store in the npar configuration,

Thanks.

[RAJD1]

Experts,

seems I got a solution,  the server is PA-RISC , and seems for PA-RISC  parmodify is supported withing /from a vpar.

(below in : 2nd bullet having the answer)

http://docstore.mik.ua/manuals/hp-ux/en/T1335-90098/ch05s18.html

To modify stable storage, you must either:

• go into standalone/nPars mode and use setboot or parmodify

• use parmodify for PA-RISC nPartitionable servers (parmodify is not supported from within the vPars environment on Integrity servers)

• go to the BCH for PA-RISC or EFI Shell for Integrity systems

Thanks...