- Community Home
- >
- Servers and Operating Systems
- >
- Operating Systems
- >
- Operating System - HP-UX
- >
- Re: powermt fail
Operating System - HP-UX
1753481
Members
4178
Online
108794
Solutions
Forums
Categories
Company
Local Language
back
Forums
Discussions
Forums
- Data Protection and Retention
- Entry Storage Systems
- Legacy
- Midrange and Enterprise Storage
- Storage Networking
- HPE Nimble Storage
Discussions
Discussions
Discussions
Forums
Discussions
back
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
- BladeSystem Infrastructure and Application Solutions
- Appliance Servers
- Alpha Servers
- BackOffice Products
- Internet Products
- HPE 9000 and HPE e3000 Servers
- Networking
- Netservers
- Secure OS Software for Linux
- Server Management (Insight Manager 7)
- Windows Server 2003
- Operating System - Tru64 Unix
- ProLiant Deployment and Provisioning
- Linux-Based Community / Regional
- Microsoft System Center Integration
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Blogs
Information
Community
Resources
Community Language
Language
Forums
Blogs
Topic Options
- Subscribe to RSS Feed
- Mark Topic as New
- Mark Topic as Read
- Float this Topic for Current User
- Bookmark
- Subscribe
- Printer Friendly Page
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
05-04-2011 06:52 AM
05-04-2011 06:52 AM
powermt fail
Hi,
i have a RX7640 11iV2 connected to cx3000
When i reboot any vpar, powermt display dev=all give errors
Half paths are dead, to recover, i execute this steps :
mv /etc/powermt.custom /etc/powermt.custom.old
ioscan -fnC disk
insf -eC disk
powermt config
powermt display dev=all
powermt save
try to reboot, powermt is corrupted
I have upgraded fiber channel, old version are not supported on my vpar
powerpath is in relase 5.1SP2 it's ok.
have you ani idea ?
Policy must be modified on powerpath ?
for informations , result of powermt display dev=all when it's ok
powermt display dev=all
CLARiiON ID=CK200063400462 [sgcar JDF-RACR]
Logical device ID=6006016041201900844A92731F61E011 [(car) RACT_ASM_DATA]
state=alive; policy=CLAROpt; priority=0; queued-IOs=0;
Owner: default=SP A, current=SP A Array failover mode: 1
==============================================================================
--------------- Host --------------- - Stor - -- I/O Path -- -- Stats ---
### HW Path I/O Paths Interf. Mode State Q-IOs Errors
==============================================================================
14 1/0/8/1/0/4/0.3.0.0.0.0.5 c14t0d5 SP A0 active alive 0 0
15 1/0/8/1/0/4/0.3.4.0.0.0.5 c15t0d5 SP B1 active alive 0 0
16 1/0/10/1/0/4/0.4.0.0.0.0.5 c16t0d5 SP A1 active alive 0 0
17 1/0/10/1/0/4/0.4.4.0.0.0.5 c17t0d5 SP B0 active alive 0 0
CLARiiON ID=CK200063400462 [sgcar JDF-RACR]
Logical device ID=6006016041201900BCF4D57A1F61E011 [(car) RACT_ASM_FRA]
state=alive; policy=CLAROpt; priority=0; queued-IOs=0;
Owner: default=SP A, current=SP A Array failover mode: 1
==============================================================================
--------------- Host --------------- - Stor - -- I/O Path -- -- Stats ---
### HW Path I/O Paths Interf. Mode State Q-IOs Errors
==============================================================================
14 1/0/8/1/0/4/0.3.0.0.0.0.6 c14t0d6 SP A0 active alive 0 0
15 1/0/8/1/0/4/0.3.4.0.0.0.6 c15t0d6 SP B1 active alive 0 0
16 1/0/10/1/0/4/0.4.0.0.0.0.6 c16t0d6 SP A1 active alive 0 0
17 1/0/10/1/0/4/0.4.4.0.0.0.6 c17t0d6 SP B0 active alive 0 0
CLARiiON ID=CK200063400462 [sgcar JDF-RACR]
Logical device ID=60060160EEF1190024E23EBEE32DDF11 [(car) RACR_ASM_FRA]
state=alive; policy=CLAROpt; priority=0; queued-IOs=0;
Owner: default=SP B, current=SP B Array failover mode: 1
==============================================================================
--------------- Host --------------- - Stor - -- I/O Path -- -- Stats ---
### HW Path I/O Paths Interf. Mode State Q-IOs Errors
==============================================================================
14 1/0/8/1/0/4/0.3.0.0.0.0.3 c14t0d3 SP A0 active alive 0 0
15 1/0/8/1/0/4/0.3.4.0.0.0.3 c15t0d3 SP B1 active alive 0 0
16 1/0/10/1/0/4/0.4.0.0.0.0.3 c16t0d3 SP A1 active alive 0 0
17 1/0/10/1/0/4/0.4.4.0.0.0.3 c17t0d3 SP B0 active alive 0 0
CLARiiON ID=CK200063400462 [sgcar JDF-RACR]
Logical device ID=60060160EEF119002EA238C6E02DDF11 [(car) RACR_ASM_DATA]
state=alive; policy=CLAROpt; priority=0; queued-IOs=0;
Owner: default=SP A, current=SP A Array failover mode: 1
==============================================================================
--------------- Host --------------- - Stor - -- I/O Path -- -- Stats ---
### HW Path I/O Paths Interf. Mode State Q-IOs Errors
==============================================================================
14 1/0/8/1/0/4/0.3.0.0.0.0.1 c14t0d1 SP A0 active alive 0 0
15 1/0/8/1/0/4/0.3.4.0.0.0.1 c15t0d1 SP B1 active alive 0 0
16 1/0/10/1/0/4/0.4.0.0.0.0.1 c16t0d1 SP A1 active alive 0 0
17 1/0/10/1/0/4/0.4.4.0.0.0.1 c17t0d1 SP B0 active alive 0 0
CLARiiON ID=CK200063400462 [sgcar JDF-RACR]
Logical device ID=60060160EEF11900320DB46EE42DDF11 [(car) RACR_Voting_A]
state=alive; policy=CLAROpt; priority=0; queued-IOs=0;
Owner: default=SP B, current=SP B Array failover mode: 1
==============================================================================
--------------- Host --------------- - Stor - -- I/O Path -- -- Stats ---
### HW Path I/O Paths Interf. Mode State Q-IOs Errors
==============================================================================
14 1/0/8/1/0/4/0.3.0.0.0.0.0 c14t0d0 SP A0 active alive 0 0
15 1/0/8/1/0/4/0.3.4.0.0.0.0 c15t0d0 SP B1 active alive 0 0
16 1/0/10/1/0/4/0.4.0.0.0.0.0 c16t0d0 SP A1 active alive 0 0
17 1/0/10/1/0/4/0.4.4.0.0.0.0 c17t0d0 SP B0 active alive 0 0
CLARiiON ID=CK200063400462 [sgcar JDF-RACR]
Logical device ID=60060160EEF1190046AD1702E42DDF11 [(car) RACR_OCR_A]
state=alive; policy=CLAROpt; priority=0; queued-IOs=0;
Owner: default=SP B, current=SP B Array failover mode: 1
==============================================================================
--------------- Host --------------- - Stor - -- I/O Path -- -- Stats ---
### HW Path I/O Paths Interf. Mode State Q-IOs Errors
==============================================================================
14 1/0/8/1/0/4/0.3.0.0.0.0.4 RACR_OCR_A SP A0 active alive 0 0
15 1/0/8/1/0/4/0.3.4.0.0.0.4 c15t0d4 SP B1 active alive 0 0
16 1/0/10/1/0/4/0.4.0.0.0.0.4 c16t0d4 SP A1 active alive 0 0
17 1/0/10/1/0/4/0.4.4.0.0.0.4 c17t0d4 SP B0 active alive 0 0
CLARiiON ID=CK200063400462 [sgcar JDF-RACR]
Logical device ID=60060160EEF119007497079FE42DDF11 [(car) RACR_Voting_C]
state=alive; policy=CLAROpt; priority=0; queued-IOs=0;
Owner: default=SP B, current=SP B Array failover mode: 1
==============================================================================
--------------- Host --------------- - Stor - -- I/O Path -- -- Stats ---
### HW Path I/O Paths Interf. Mode State Q-IOs Errors
==============================================================================
14 1/0/8/1/0/4/0.3.0.0.0.0.2 c14t0d2 SP A0 active alive 0 0
15 1/0/8/1/0/4/0.3.4.0.0.0.2 c15t0d2 SP B1 active alive 0 0
16 1/0/10/1/0/4/0.4.0.0.0.0.2 c16t0d2 SP A1 active alive 0 0
17 1/0/10/1/0/4/0.4.4.0.0.0.2 c17t0d2 SP B0 active alive 0 0
CLARiiON ID=CK200063500606 [sgjdf JDF-RACR]
Logical device ID=60060160EE411A008498999F2561E011 [(jdf) RACR_Voting_B]
state=alive; policy=CLAROpt; priority=0; queued-IOs=0;
Owner: default=SP A, current=SP A Array failover mode: 1
==============================================================================
--------------- Host --------------- - Stor - -- I/O Path -- -- Stats ---
### HW Path I/O Paths Interf. Mode State Q-IOs Errors
==============================================================================
10 1/0/8/1/0/4/0.1.0.0.0.0.1 c10t0d1 SP A0 active alive 0 0
11 1/0/8/1/0/4/0.1.4.0.0.0.1 c11t0d1 SP B1 active alive 0 0
12 1/0/10/1/0/4/0.2.0.0.0.0.1 c12t0d1 SP A1 active alive 0 0
13 1/0/10/1/0/4/0.2.4.0.0.0.1 c13t0d1 SP B0 active alive 0 0
CLARiiON ID=CK200063500606 [sgjdf JDF-RACR]
Logical device ID=60060160EE411A00CE6C4FB22561E011 [(jdf) RACR_OCR_B]
state=alive; policy=CLAROpt; priority=0; queued-IOs=0;
Owner: default=SP A, current=SP A Array failover mode: 1
==============================================================================
--------------- Host --------------- - Stor - -- I/O Path -- -- Stats ---
### HW Path I/O Paths Interf. Mode State Q-IOs Errors
==============================================================================
10 1/0/8/1/0/4/0.1.0.0.0.0.0 c10t0d0 SP A0 active alive 0 0
11 1/0/8/1/0/4/0.1.4.0.0.0.0 c11t0d0 SP B1 active alive 0 0
12 1/0/10/1/0/4/0.2.0.0.0.0.0 c12t0d0 SP A1 active alive 0 0
13 1/0/10/1/0/4/0.2.4.0.0.0.0 c13t0d0 SP B0 active alive 0 0
CLARiiON ID=CK200063500606 [sgjdf JDF-RACR]
Logical device ID=60060160EE411A00D605A97B2561E011 [(jdf) RACT_ASM_DATA]
state=alive; policy=CLAROpt; priority=0; queued-IOs=0;
Owner: default=SP A, current=SP A Array failover mode: 1
==============================================================================
--------------- Host --------------- - Stor - -- I/O Path -- -- Stats ---
### HW Path I/O Paths Interf. Mode State Q-IOs Errors
==============================================================================
10 1/0/8/1/0/4/0.1.0.0.0.0.2 c10t0d2 SP A0 active alive 0 0
11 1/0/8/1/0/4/0.1.4.0.0.0.2 c11t0d2 SP B1 active alive 0 0
12 1/0/10/1/0/4/0.2.0.0.0.0.2 c12t0d2 SP A1 active alive 0 0
13 1/0/10/1/0/4/0.2.4.0.0.0.2 c13t0d2 SP B0 active alive 0 0
CLARiiON ID=CK200063500606 [sgjdf JDF-RACR]
Logical device ID=60060160EE411A00E2037F822561E011 [(jdf) RACT_ASM_FRA]
state=alive; policy=CLAROpt; priority=0; queued-IOs=0;
Owner: default=SP A, current=SP A Array failover mode: 1
==============================================================================
--------------- Host --------------- - Stor - -- I/O Path -- -- Stats ---
### HW Path I/O Paths Interf. Mode State Q-IOs Errors
==============================================================================
10 1/0/8/1/0/4/0.1.0.0.0.0.3 c10t0d3 SP A0 active alive 0 0
11 1/0/8/1/0/4/0.1.4.0.0.0.3 c11t0d3 SP B1 active alive 0 0
12 1/0/10/1/0/4/0.2.0.0.0.0.3 c12t0d3 SP A1 active alive 0 0
13 1/0/10/1/0/4/0.2.4.0.0.0.3 c13t0d3 SP B0 active alive 0 0
i have a RX7640 11iV2 connected to cx3000
When i reboot any vpar, powermt display dev=all give errors
Half paths are dead, to recover, i execute this steps :
mv /etc/powermt.custom /etc/powermt.custom.old
ioscan -fnC disk
insf -eC disk
powermt config
powermt display dev=all
powermt save
try to reboot, powermt is corrupted
I have upgraded fiber channel, old version are not supported on my vpar
powerpath is in relase 5.1SP2 it's ok.
have you ani idea ?
Policy must be modified on powerpath ?
for informations , result of powermt display dev=all when it's ok
powermt display dev=all
CLARiiON ID=CK200063400462 [sgcar JDF-RACR]
Logical device ID=6006016041201900844A92731F61E011 [(car) RACT_ASM_DATA]
state=alive; policy=CLAROpt; priority=0; queued-IOs=0;
Owner: default=SP A, current=SP A Array failover mode: 1
==============================================================================
--------------- Host --------------- - Stor - -- I/O Path -- -- Stats ---
### HW Path I/O Paths Interf. Mode State Q-IOs Errors
==============================================================================
14 1/0/8/1/0/4/0.3.0.0.0.0.5 c14t0d5 SP A0 active alive 0 0
15 1/0/8/1/0/4/0.3.4.0.0.0.5 c15t0d5 SP B1 active alive 0 0
16 1/0/10/1/0/4/0.4.0.0.0.0.5 c16t0d5 SP A1 active alive 0 0
17 1/0/10/1/0/4/0.4.4.0.0.0.5 c17t0d5 SP B0 active alive 0 0
CLARiiON ID=CK200063400462 [sgcar JDF-RACR]
Logical device ID=6006016041201900BCF4D57A1F61E011 [(car) RACT_ASM_FRA]
state=alive; policy=CLAROpt; priority=0; queued-IOs=0;
Owner: default=SP A, current=SP A Array failover mode: 1
==============================================================================
--------------- Host --------------- - Stor - -- I/O Path -- -- Stats ---
### HW Path I/O Paths Interf. Mode State Q-IOs Errors
==============================================================================
14 1/0/8/1/0/4/0.3.0.0.0.0.6 c14t0d6 SP A0 active alive 0 0
15 1/0/8/1/0/4/0.3.4.0.0.0.6 c15t0d6 SP B1 active alive 0 0
16 1/0/10/1/0/4/0.4.0.0.0.0.6 c16t0d6 SP A1 active alive 0 0
17 1/0/10/1/0/4/0.4.4.0.0.0.6 c17t0d6 SP B0 active alive 0 0
CLARiiON ID=CK200063400462 [sgcar JDF-RACR]
Logical device ID=60060160EEF1190024E23EBEE32DDF11 [(car) RACR_ASM_FRA]
state=alive; policy=CLAROpt; priority=0; queued-IOs=0;
Owner: default=SP B, current=SP B Array failover mode: 1
==============================================================================
--------------- Host --------------- - Stor - -- I/O Path -- -- Stats ---
### HW Path I/O Paths Interf. Mode State Q-IOs Errors
==============================================================================
14 1/0/8/1/0/4/0.3.0.0.0.0.3 c14t0d3 SP A0 active alive 0 0
15 1/0/8/1/0/4/0.3.4.0.0.0.3 c15t0d3 SP B1 active alive 0 0
16 1/0/10/1/0/4/0.4.0.0.0.0.3 c16t0d3 SP A1 active alive 0 0
17 1/0/10/1/0/4/0.4.4.0.0.0.3 c17t0d3 SP B0 active alive 0 0
CLARiiON ID=CK200063400462 [sgcar JDF-RACR]
Logical device ID=60060160EEF119002EA238C6E02DDF11 [(car) RACR_ASM_DATA]
state=alive; policy=CLAROpt; priority=0; queued-IOs=0;
Owner: default=SP A, current=SP A Array failover mode: 1
==============================================================================
--------------- Host --------------- - Stor - -- I/O Path -- -- Stats ---
### HW Path I/O Paths Interf. Mode State Q-IOs Errors
==============================================================================
14 1/0/8/1/0/4/0.3.0.0.0.0.1 c14t0d1 SP A0 active alive 0 0
15 1/0/8/1/0/4/0.3.4.0.0.0.1 c15t0d1 SP B1 active alive 0 0
16 1/0/10/1/0/4/0.4.0.0.0.0.1 c16t0d1 SP A1 active alive 0 0
17 1/0/10/1/0/4/0.4.4.0.0.0.1 c17t0d1 SP B0 active alive 0 0
CLARiiON ID=CK200063400462 [sgcar JDF-RACR]
Logical device ID=60060160EEF11900320DB46EE42DDF11 [(car) RACR_Voting_A]
state=alive; policy=CLAROpt; priority=0; queued-IOs=0;
Owner: default=SP B, current=SP B Array failover mode: 1
==============================================================================
--------------- Host --------------- - Stor - -- I/O Path -- -- Stats ---
### HW Path I/O Paths Interf. Mode State Q-IOs Errors
==============================================================================
14 1/0/8/1/0/4/0.3.0.0.0.0.0 c14t0d0 SP A0 active alive 0 0
15 1/0/8/1/0/4/0.3.4.0.0.0.0 c15t0d0 SP B1 active alive 0 0
16 1/0/10/1/0/4/0.4.0.0.0.0.0 c16t0d0 SP A1 active alive 0 0
17 1/0/10/1/0/4/0.4.4.0.0.0.0 c17t0d0 SP B0 active alive 0 0
CLARiiON ID=CK200063400462 [sgcar JDF-RACR]
Logical device ID=60060160EEF1190046AD1702E42DDF11 [(car) RACR_OCR_A]
state=alive; policy=CLAROpt; priority=0; queued-IOs=0;
Owner: default=SP B, current=SP B Array failover mode: 1
==============================================================================
--------------- Host --------------- - Stor - -- I/O Path -- -- Stats ---
### HW Path I/O Paths Interf. Mode State Q-IOs Errors
==============================================================================
14 1/0/8/1/0/4/0.3.0.0.0.0.4 RACR_OCR_A SP A0 active alive 0 0
15 1/0/8/1/0/4/0.3.4.0.0.0.4 c15t0d4 SP B1 active alive 0 0
16 1/0/10/1/0/4/0.4.0.0.0.0.4 c16t0d4 SP A1 active alive 0 0
17 1/0/10/1/0/4/0.4.4.0.0.0.4 c17t0d4 SP B0 active alive 0 0
CLARiiON ID=CK200063400462 [sgcar JDF-RACR]
Logical device ID=60060160EEF119007497079FE42DDF11 [(car) RACR_Voting_C]
state=alive; policy=CLAROpt; priority=0; queued-IOs=0;
Owner: default=SP B, current=SP B Array failover mode: 1
==============================================================================
--------------- Host --------------- - Stor - -- I/O Path -- -- Stats ---
### HW Path I/O Paths Interf. Mode State Q-IOs Errors
==============================================================================
14 1/0/8/1/0/4/0.3.0.0.0.0.2 c14t0d2 SP A0 active alive 0 0
15 1/0/8/1/0/4/0.3.4.0.0.0.2 c15t0d2 SP B1 active alive 0 0
16 1/0/10/1/0/4/0.4.0.0.0.0.2 c16t0d2 SP A1 active alive 0 0
17 1/0/10/1/0/4/0.4.4.0.0.0.2 c17t0d2 SP B0 active alive 0 0
CLARiiON ID=CK200063500606 [sgjdf JDF-RACR]
Logical device ID=60060160EE411A008498999F2561E011 [(jdf) RACR_Voting_B]
state=alive; policy=CLAROpt; priority=0; queued-IOs=0;
Owner: default=SP A, current=SP A Array failover mode: 1
==============================================================================
--------------- Host --------------- - Stor - -- I/O Path -- -- Stats ---
### HW Path I/O Paths Interf. Mode State Q-IOs Errors
==============================================================================
10 1/0/8/1/0/4/0.1.0.0.0.0.1 c10t0d1 SP A0 active alive 0 0
11 1/0/8/1/0/4/0.1.4.0.0.0.1 c11t0d1 SP B1 active alive 0 0
12 1/0/10/1/0/4/0.2.0.0.0.0.1 c12t0d1 SP A1 active alive 0 0
13 1/0/10/1/0/4/0.2.4.0.0.0.1 c13t0d1 SP B0 active alive 0 0
CLARiiON ID=CK200063500606 [sgjdf JDF-RACR]
Logical device ID=60060160EE411A00CE6C4FB22561E011 [(jdf) RACR_OCR_B]
state=alive; policy=CLAROpt; priority=0; queued-IOs=0;
Owner: default=SP A, current=SP A Array failover mode: 1
==============================================================================
--------------- Host --------------- - Stor - -- I/O Path -- -- Stats ---
### HW Path I/O Paths Interf. Mode State Q-IOs Errors
==============================================================================
10 1/0/8/1/0/4/0.1.0.0.0.0.0 c10t0d0 SP A0 active alive 0 0
11 1/0/8/1/0/4/0.1.4.0.0.0.0 c11t0d0 SP B1 active alive 0 0
12 1/0/10/1/0/4/0.2.0.0.0.0.0 c12t0d0 SP A1 active alive 0 0
13 1/0/10/1/0/4/0.2.4.0.0.0.0 c13t0d0 SP B0 active alive 0 0
CLARiiON ID=CK200063500606 [sgjdf JDF-RACR]
Logical device ID=60060160EE411A00D605A97B2561E011 [(jdf) RACT_ASM_DATA]
state=alive; policy=CLAROpt; priority=0; queued-IOs=0;
Owner: default=SP A, current=SP A Array failover mode: 1
==============================================================================
--------------- Host --------------- - Stor - -- I/O Path -- -- Stats ---
### HW Path I/O Paths Interf. Mode State Q-IOs Errors
==============================================================================
10 1/0/8/1/0/4/0.1.0.0.0.0.2 c10t0d2 SP A0 active alive 0 0
11 1/0/8/1/0/4/0.1.4.0.0.0.2 c11t0d2 SP B1 active alive 0 0
12 1/0/10/1/0/4/0.2.0.0.0.0.2 c12t0d2 SP A1 active alive 0 0
13 1/0/10/1/0/4/0.2.4.0.0.0.2 c13t0d2 SP B0 active alive 0 0
CLARiiON ID=CK200063500606 [sgjdf JDF-RACR]
Logical device ID=60060160EE411A00E2037F822561E011 [(jdf) RACT_ASM_FRA]
state=alive; policy=CLAROpt; priority=0; queued-IOs=0;
Owner: default=SP A, current=SP A Array failover mode: 1
==============================================================================
--------------- Host --------------- - Stor - -- I/O Path -- -- Stats ---
### HW Path I/O Paths Interf. Mode State Q-IOs Errors
==============================================================================
10 1/0/8/1/0/4/0.1.0.0.0.0.3 c10t0d3 SP A0 active alive 0 0
11 1/0/8/1/0/4/0.1.4.0.0.0.3 c11t0d3 SP B1 active alive 0 0
12 1/0/10/1/0/4/0.2.0.0.0.0.3 c12t0d3 SP A1 active alive 0 0
13 1/0/10/1/0/4/0.2.4.0.0.0.3 c13t0d3 SP B0 active alive 0 0
1 REPLY 1
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
05-04-2011 07:33 AM
05-04-2011 07:33 AM
Re: powermt fail
others informations
powermt display options
Default storage system class: all
Show CLARiiON LUN names: true
Path Latency Monitor: Off
Path Latency Threshold: 0 Sec.
Storage
System Class Attributes
------------ ----------
Symmetrix periodic autorestore = on
status = managed
CLARiiON periodic autorestore = on
status = managed
Hitachi periodic autorestore = on
status = managed
Invista periodic autorestore = on
status = managed
HP xp periodic autorestore = on
status = managed
Ess periodic autorestore = on
status = managed
HP HSx periodic autorestore = on
status = managed
powermt display hba_mode
Symmetrix logical device count=0
CLARiiON logical device count=11
Hitachi logical device count=0
Invista logical device count=0
HP xp logical device count=0
Ess logical device count=0
HP HSx logical device count=0
==============================================================================
----- Host Bus Adapters --------- ------ I/O Paths ----- Stats
### HW Path Summary Total Dead Q-IOs Mode
==============================================================================
10 1/0/8/1/0/4/0.1.0.0.0 optimal 4 0 0 Enabled
11 1/0/8/1/0/4/0.1.4.0.0 optimal 4 0 0 Enabled
12 1/0/10/1/0/4/0.2.0.0.0 optimal 4 0 0 Enabled
13 1/0/10/1/0/4/0.2.4.0.0 optimal 4 0 0 Enabled
14 1/0/8/1/0/4/0.3.0.0.0 optimal 7 0 0 Enabled
15 1/0/8/1/0/4/0.3.4.0.0 optimal 7 0 0 Enabled
16 1/0/10/1/0/4/0.4.0.0.0 optimal 7 0 0 Enabled
17 1/0/10/1/0/4/0.4.4.0.0 optimal 7 0 0 Enabled
powermt display options
Default storage system class: all
Show CLARiiON LUN names: true
Path Latency Monitor: Off
Path Latency Threshold: 0 Sec.
Storage
System Class Attributes
------------ ----------
Symmetrix periodic autorestore = on
status = managed
CLARiiON periodic autorestore = on
status = managed
Hitachi periodic autorestore = on
status = managed
Invista periodic autorestore = on
status = managed
HP xp periodic autorestore = on
status = managed
Ess periodic autorestore = on
status = managed
HP HSx periodic autorestore = on
status = managed
powermt display hba_mode
Symmetrix logical device count=0
CLARiiON logical device count=11
Hitachi logical device count=0
Invista logical device count=0
HP xp logical device count=0
Ess logical device count=0
HP HSx logical device count=0
==============================================================================
----- Host Bus Adapters --------- ------ I/O Paths ----- Stats
### HW Path Summary Total Dead Q-IOs Mode
==============================================================================
10 1/0/8/1/0/4/0.1.0.0.0 optimal 4 0 0 Enabled
11 1/0/8/1/0/4/0.1.4.0.0 optimal 4 0 0 Enabled
12 1/0/10/1/0/4/0.2.0.0.0 optimal 4 0 0 Enabled
13 1/0/10/1/0/4/0.2.4.0.0 optimal 4 0 0 Enabled
14 1/0/8/1/0/4/0.3.0.0.0 optimal 7 0 0 Enabled
15 1/0/8/1/0/4/0.3.4.0.0 optimal 7 0 0 Enabled
16 1/0/10/1/0/4/0.4.0.0.0 optimal 7 0 0 Enabled
17 1/0/10/1/0/4/0.4.4.0.0 optimal 7 0 0 Enabled
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.
News and Events
Support
© Copyright 2024 Hewlett Packard Enterprise Development LP