problems with new addition in HP-UX in Itanium64

[luis jaimes]

i have a server HP-UX in itanium 64, when its a new adition en this server i cant see this.? only i can see when this server is reboot.

[Andrew Rutter]

hi,

your english is not very good?

can you try and expand abit more on what exactly you have, and what you see and what you want ot have and see?

do you mean you cannot see it booting up? but it does boot up then you can see the login screen?

abit more information please

Andy

[luis jaimes]

ES VERDAD MI INGLES ES MUY MALO

EL PROBLEMA QUE TENGO ES QUE CUANDO ASIGNO DE UN XP A MI SERVER HP-UX MONTADO EN ITANIUM64 NO VEO LA DICION NUEVA. SOLO REINICIANDO EL SERVIDOR.

GRACIAS

[Mel Burslan]

My Spanish is non-existent but with the help of google and letters XP in the Sapnish context, I think you are adding new disks/LUNs from an XP disk array and can not see the newly added devices without reboot.

Try this after adding a new LUN:

xpinfo

can you see the newly added volume in the output ? If no, talk to the SAN admins and have them configure zoning. If yes, proceed.

ioscan -fn
can you see the device path as CLAIMED in the output ? If no, there is something wrong with either zoning or device creation. If yes


insf -a
ioscan -fnC disk

if everything went fine so far, you shoud see the device drivers, such as

/dev/dsk/rXtXdX /dev/rdsk/rXtXdX

[Dennis Handly]

>ES VERDAD MI INGLES ES MUY MALO

You can use babelfish to translate. Except for disk and server it does a good job:
http://babelfish.yahoo.com/translate_url?doit=done&tt=url&intl=1&fr=bf-res&trurl=http%3A%2F%2Fforums.itrc.hp.com%2Fservice%2Fforums%2Fquestionanswer.do%3FthreadId%3D1359724&lp=es_en&btnTrUrl=Translate

[Michael Schon]

You can use too translate.google.com

[luis jaimes]

gracias