cancel
Showing results for 
Search instead for 
Did you mean: 

processor count

khilari
Regular Advisor

processor count

hi guys, i have a superdome with 3 npars on it, when i do print manifest or ioscan -fnC processor they all show 20 processors and claimed,,, even with sysinfo..
What i would like to know is that how many processor does each npar is accessing out of those 20........??
Can 2 npars share one processor.??
3 REPLIES
Court Campbell
Honored Contributor

Re: processor count

No. Npars cannot share processors.
"The difference between me and you? I will read the man page." and "Respect the hat." and "You could just do a search on ITRC, you don't need to start a thread on a topic that's been answered 100 times already." Oh, and "What. no points???"
Sharma Sanjeev
Respected Contributor

Re: processor count

Hi Check with parstatus

regards
Sanjeev
Everything is Possible as " IMPOSSIBLE" word itself says I M POSSIBLE
Torsten.
Acclaimed Contributor

Re: processor count

An ioscan within a npar can only see the CPUs that belong to this npar!

This can be different with vPars!

Use
"parstatus"

to get more info.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!