"dmesg " command - Error Message

[HP UNIX Professionals]

Hi Experts,

I have HPUX ( Itanium )Box, When i run the "dmesg " command i am getting these output. I am not able to understat the problem, Anybody know why this message is comming, Pleas guide me.

Thanks in Advance

System Console is on the Built-In Serial Interface

iether0: INITIALIZING HP AB352-60001 PCI/PCI-X 1000Base-T Dual-port Core at hardware path 0/1/2/0

iether1: INITIALIZING HP AB352-60001 PCI/PCI-X 1000Base-T Dual-port Core at hardware path 0/1/2/1

Acceleport Xr Host Adapter (PCI) at 0xffffffffd0200000: mem=0xffffffffd0000000, # of ports=8 V Version B.11.11.01 : Jun 22 2006 18:49:01

Acceleport Xr Host Adapter (PCI) at 0xffffffffd0200000: Extended Description: Digi Acceleport 8r 920 Host Adapter

Entering cifs_init...

Initialization finished successfully... slot is 9

Logical volume 64, 0x3 configured as ROOT

Logical volume 64, 0x2 configured as SWAP

Logical volume 64, 0x2 configured as DUMP

Swap device table: (start & size given in 512-byte blocks)

entry 0 - major is 64, minor is 0x2; start = 0, size = 24576000

Dump device table: (start & size given in 1-Kbyte blocks)

entry 0000000000000000 - major is 31, minor is 0x21000; start = 314208, size = 12288000

Starting the STREAMS daemons-phase 1

Create STCP device files

Starting the STREAMS daemons-phase 2

$Revision: vmunix: vw: -proj selectors: CUPI80_BL2000_1108 -c 'Vw for CUPI80_BL2000_1108 build' -- cupi80_bl2000_1108 'CUPI80_BL2000_1108' Wed Nov 8 19:24:56 PST 2000 $

Memory Information:

physical page size = 4096 bytes, logical page size = 4096 bytes

Physical: 14678016 Kbytes, lockable: 13484728 Kbytes, available: 13008636 Kbytes

[Torsten. · Accepted solution]

You see the contents of the message buffer with normal boot messages (you see the same at console during boot) - I cannot see a problem here.

No need to worry about - this is normal.

[Pete Randall]

No "error" messages there - it is all normal boot process output.


Pete

[Dennis Handly]

>When I run the "dmesg" command I am getting these output.

Better to look at syslog.log for timestamped info.

[prasadb]

no problems are visible here, May be, you can elaborate further if you are facing any issues in server.

thanks.

[TwoProc]

This is a normal boot, the problem begins when you run dmesg and this isn't all you see, or you run it that the boot area is gone because the list of items it wants you to be aware of is so long that the top of the output is spooled off. Like other have said to you, check your syslog as a more reliable method of seeing errors and time they occur.