Operating System - Tru64 Unix
1748028 Members
5131 Online
108757 Solutions
New Discussion юеВ

Re: ra200 disk failure does not show up on storage works command console

 
Michael Schulte zur Sur
Honored Contributor

ra200 disk failure does not show up on storage works command console

Hi,

I have had a disk failure in a raid 1 ra200 raidset. If it were not for the old swxcrmon, I would not have noticed, because the storage works command console v2.2.0.213 did not show it on host icon level. The ra200 applet version is v2.1-316. The system is running v4.0f. Any idea?

greetings

Michael
3 REPLIES 3
Ninad_1
Honored Contributor

Re: ra200 disk failure does not show up on storage works command console

Hi Michael,
I dont have any answer to your question but why dont you post your message in Storage - SAN category ? May be you will get a reply

Ninad
Ralf Puchner
Honored Contributor

Re: ra200 disk failure does not show up on storage works command console

Or open a call within the support center?
Help() { FirstReadManual(urgently); Go_to_it;; }
Michael Schulte zur Sur
Honored Contributor

Re: ra200 disk failure does not show up on storage works command console

Hi Ninad, hi Ralf,

your suggestions are good, I will do them.

thanks,

Michael