cancel
Showing results for 
Search instead for 
Did you mean: 

re : rx2660 help

Vincent_5
Super Advisor

re : rx2660 help

Hi Guys,
Can anyone help, I'm trying to install hpux 11.31 on a rx2660 install with a HP smart array p400 card, somehow it does not allow me to setup the operating system. It hang. Can anyone advice. Attach is the screen shot for your referrence.

Regards
Vincent
nothing is better than to know more
7 REPLIES
Vincent_5
Super Advisor

Re: re : rx2660 help

Hi Guys,
Sorry , I forget , I have try with HP 11.31 sept 2007 media , which it does not work out. and also a sept 2008 media

Please help.

Regards
Vincent
nothing is better than to know more
Torsten.
Acclaimed Contributor

Re: re : rx2660 help

Where is your console connected?

Go to EFI and run conconfig:

Shell> conconfig

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Vincent_5
Super Advisor

Re: re : rx2660 help

Hi Torsen,
I'm connected to the RX2660 server via the seral link with my laptop running putty.

Regards
Vincent
nothing is better than to know more
Kapil Jha
Honored Contributor

Re: re : rx2660 help

have you tried to completely power it off and start it again.

BR,
Kapil+
I am in this small bowl, I wane see the real world......
Vincent_5
Super Advisor

Re: re : rx2660 help

Hi Guys,
I have already try turning off the power and on again, I even try removing the existing array and recreate again, but is still the same. Please advice??

Regards
Vincent
nothing is better than to know more
Torsten.
Acclaimed Contributor

Re: re : rx2660 help

I'm sure your console setting is VGA.



As said, run this:



Shell> conconfig



to confirm!

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Vincent_5
Super Advisor

Re: re : rx2660 help

Hi Torsen,
Thanks for the help, you save my day.You are right the console is set to VGA. I have change it to serial and it work.


Regards
Vincent
nothing is better than to know more