HPE Community
Operating System - HP-UX
1752550 Members
4872 Online
108788 Solutions
New Discussion юеВ

Re: re : smart array p800

 
SOLVED
Go to solution
Vincent_5
Super Advisor

тАО12-16-2008 11:16 PM

тАО12-16-2008 11:16 PM

re : smart array p800

Hi Guys,
Can I check if I have a rx6600 install with smart array p800 and os 11.31 unix , the harddisk is configure with 2 raid 5 and 1 raid one, assuning if the controller fail, is there a way I can backup the raid configuraion and by replacing the smart array card it will just retrieve back the raid config and recognised the raid that I have configure previous. Please advice.

Regards
Vincent
nothing is better than to know more
0 Kudos
Reply
3 REPLIES 3
Torsten.
Acclaimed Contributor

тАО12-16-2008 11:26 PM

тАО12-16-2008 11:26 PM

Solution

Re: re : smart array p800

If you have a RAID 5 you have a smartarray for sure. check ioscan -fn first to see what you have ...

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.
__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Reply
Torsten.
Acclaimed Contributor

тАО12-16-2008 11:31 PM

тАО12-16-2008 11:31 PM

Re: re : smart array p800

Forgot to say you can get all related information via sautil and saconfig tools to keep and store it.

If the controller fails and you replace this, the new controller will pick up the current configuration from the disks - no way to / no need to restore the config to the controller manually.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.
__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Reply
Vincent_5
Super Advisor

тАО12-17-2008 06:04 PM

тАО12-17-2008 06:04 PM

Re: re : smart array p800

Hi Torsen,
Thanks for the info.

Regards
Vincent
nothing is better than to know more
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.