HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
cancel
Showing results for 
Search instead for 
Did you mean: 

rename lan interface

 
SOLVED
Go to solution
Ludovic Derlyn
Esteemed Contributor

rename lan interface

hi

my dba would add two nodes on rac clusters
lan names must be identical on each nodes

here, names should be lan 13 and lan 14

lan are :

iether4: INITIALIZING HP 447881-001 PCIe 4-port 1000Mb/s Mezzanine Adapter at hardware path 0/3/0/0/0/0/2/0/0/0
iether5: INITIALIZING HP 447881-001 PCIe 4-port 1000Mb/s Mezzanine Adapter at hardware path 0/3/0/0/0/0/2/0/0/1
iether6: INITIALIZING HP 447881-001 PCIe 4-port 1000Mb/s Mezzanine Adapter at hardware path 0/3/0/0/0/0/4/0/0/0
iether7: INITIALIZING HP 447881-001 PCIe 4-port 1000Mb/s Mezzanine Adapter at hardware path 0/3/0/0/0/0/4/0/0/1

post give me some informations with A Clay stephenson,

http://forums11.itrc.hp.com/service/forums/questionanswer.do?threadId=1014733

but what is correct value for lan 13 and lan 14

0/3/0/0/0/0/ ????????????????????

i have tested some values but it's not correct
Any ideas ?


5 REPLIES
Robert-Jan Goossens
Honored Contributor
Solution

Re: rename lan interface

Hi,

Title: HP-UX 11.x Operating Environment - How to Change an Instance Number?
Document ID: emr_na-c01078919-3

https://www11.itrc.hp.com/service/cki/docDisplay.do?docLocale=en&docId=emr_na-c01078919

Regards,
Robert-Jan
Ludovic Derlyn
Esteemed Contributor

Re: rename lan interface

hello

i have no access to this document...
Turgay Cavdar
Honored Contributor

Re: rename lan interface

Here.
"attached copyright document removed as per ITRC Guidelines"
Ludovic Derlyn
Esteemed Contributor

Re: rename lan interface

thanks

where find ioconfig2infile ?

thanks
Turgay Cavdar
Honored Contributor

Re: rename lan interface

Hi,
You should first find your interfaces so begin by typing:
1-)Get your devices
lanscan

You will see your devices listed as lanx, lany whatever get their hw path.

2-)Create a file, type your hw path:
vi /tmp/io
0/0/1 lan 13
0/0/2 lan 14

3-)Change the config
ioinit -f /tmp/io -r (initiate reboot)