rp3440 IO paths

[john horrocks]

I am having difficulties in finding the IO path numbering for the 4 IO slots on the rp3440 system. At least I know the paths but can not see which slot corresponds to which address. I know If I was physically close to them I would be able to check them out, but unfortunately this is not practical. Can any one help?

[Peter Godron]

John,
stm may give you a better idea how things hang together. But if you are remote to the box, why do you want to see which slot corresponds to which aadress?
The only place I found something was:
www.hp.com/go/rp3440

Regards

[Steven E. Protter]

There should be a stamp/label on the back of the server that you can look at and take some notes concerning the paths.

Then:

ioscan -fnC ext_bus


That should get you output that should agree with where you see cards on the back of the box.

SEP

[Peter Godron · Accepted solution]

John,
also found the Operations manual for the machine at:
http://docs.hp.com/en/rp3410_3440_op/rp3410_3440_op.pdf
Chapter 2 briefly goes into cards.
Regards

[harry d brown jr]

Table 5-3 Internal Disk and DVD Paths
Slot Path
Slot 2 (top) 0/1/1/1.2
Slot 1 (middle) 0/1/1/0.1
Slot 0 (bottom) 0/1/1/0.0
DVD 0/0/2/0.0

Table 5-4 Extended Core I/O Paths
Function Path
Console Port 0/7/1/1.0
Remote Port 0/7/1/1.2
UPS Port 0/7/1/0.0
VGA Port 0/7/2/0 (disabled)

Table 5-5 PCI I/O Paths
I/O Slot Path
Slot 1 0/4
Slot 2 0/3
Slot 3 0/2 (Active for rp3440 only)
Slot 4 0/6 (Active for rp3440 only)

from PAGE 60 of http://docs.hp.com/en/rp3410_3440_op/rp3410_3440_op.pdf

If only HP's VISIO stencils could include that our lives would be so much easier!!


live free or die
harry d brown jr

[Duncan Edmonstone]

John,

Not sure if it functions in an rp3440, but usually 'rad -q' will let you match slots to HW paths...

HTH

Duncan

[john horrocks]

Thanks very much to you all, especially it was one of those read the flipping manual type questions. Thanks Harry for including the manual entry in your reply
John

[john horrocks]

Thanks