rp4440-4 and rp4440-8

[Ludovic Derlyn]

hi,

other command will be use is machinfo

#machinfo |more
CPU info:
Number of CPUs = 2
Clock speed = 1600 MHz
Bus speed = 400 MT/s
CPUID registers
vendor information = "GenuineIntel"
processor serial number = 0x0000000000000000
processor version info = 0x000000001f020204
architecture revision: 0
processor family: 31 Intel(R) Itanium 2 Family Processors
processor model: 2 Intel(R) Itanium 2 processor
processor revision: 2 Stepping A2
largest CPUID reg: 4
processor capabilities = 0x0000000000000001
implements long branch: 1
Bus features
implemented = 0xbdf0000060000000
selected = 0x0000000040000000
Bus Lock Signal masked

Cache info:
L1 Instruction: size = 16 KB, associativity = 4
L1 Data: size = 16 KB, associativity = 4
L2 Unified: size = 256 KB, associativity = 8
L3 Unified: size = 6144 KB, associativity = 12

Memory = 8179 MB (7.987305 GB)

Firmware info:
Firmware revision = 03.17
FP SWA driver revision: 1.18
IPMI is supported on this system.
BMC version: 3.47

Platform info:
model string = "ia64 hp server rx2620"
machine id number = 20fa4504-a36a-11da-930f-c886e55113e0
machine serial number = DEH46033NB

OS info:
sysname = HP-UX
nodename = isesp43s
release = B.11.23
version = U (unlimited-user license)
machine = ia64
idnumber = 0553272580
vmunix _release_version:
@(#) $Revision: vmunix: B11.23_LR FLAVOR=perf Fri Aug 29 22:35:38 PDT 2003 $

regards

L-DERLYN

[Torsten.]

@Ludovic: machinfo is a very useful command, but for Integrity systems only, not PA-RISC.

[Ludovic Derlyn]

Hi Torsten,

Sorry, a distraction ...I have read rp46 and not 44......