rp7400 make_tape_recovery to RP7440 error!!

[黄家团]

I use "make_tape_recovery -Av" in RP7400,and put the tape to RP7440 boot ,got the error.help !! how can i clone a system(HPUX11.11) from RP7400 to RP7440 .

Main Menu: Enter command or menu > bo p2

BCH Directed Boot Path: 1/0/1/1/0/4/0.1


Do you wish to stop at the ISL prompt prior to booting? (y/n) >> n

Initializing boot Device.


Boot IO Dependent Code (IODC) Revision 2


Boot Path Initialized.


HARD Booted.

ISL Revision A.00.43 Apr 12, 2000

ISL booting hpux (;0):INSTALL

Boot
: tape(1/0/1/1/0/4/0.1.0.0.0.0.0;0):WINSTALL
11538432 + 1941592 + 2610520 start 0x201468

Stored message buffer up to panic:

Line 2776 in /ux/core/kern/common/io/pat_psm.c: pat_return_cell_module - unrecognized entity 10 cba 0xfffffffffc081000

Line 2467 in /ux/core/kern/common/io/pat_psm.c: pat_init_cell_modules - rc -1 index 1 cell 0x0000000000dabe00 mod 0x0000000000f7e680

Line 2292 in /ux/core/kern/common/io/pat_psm.c: pat_init_cell - cell 0x0000000000dabe00 rc -1

Line 1570 in /ux/core/kern/common/io/pat_psm.c: pat_module_init - init cell failed - rc -1, cell 1

Line 827 in /ux/core/kern/common/io/cb_cdio.c: cb_module_init - mod init status -3
gate64: sysvec_vaddr = 0xc0002000 for 2 pages

[Michal Kapalka (mikap)]

hi,

one question :

did you applied the HW enablement, before you made the make_tape_recovery ???

mikap

[Steven E. Protter]

Shalom,

You may find Ignite Golden Image works better.

http://docs.hp.com/en/5992-5309/ch11s02.html

http://docs.hp.com/en/5992-3336/ch09s05.html

SEP

[Andrew Rutter]

hi,

the two servers are very very different.

this may not work this way.

image from an ignite server is the best way forward.

have you set up the cells first? configured your npars and such like first, genesis partition?

Andy

[黄家团]

i update Ignite and the tape can recovery in Rp7440.but when the system boot in rp7440 show this error

HARD Booted.

ISL Revision A.00.43 Apr 12, 2000

ISL booting hpux

Boot
: disk(1/0/0/3/0.6.0.0.0.0.0;0)/stand/vmunix
10293248 + 1777664 + 6039256 start 0x1fd0e8

Stored message buffer up to panic:

Line 2854 in /ux/core/kern/common/io/pat_psm.c: pat_return_cell_module - unrecognized entity 10 cba 0xfffffffffc081000

Line 2545 in /ux/core/kern/common/io/pat_psm.c: pat_init_cell_modules - rc -1 index 1 cell 0x0000000000c6cf28 mod 0x0000000001457e60

Line 2370 in /ux/core/kern/common/io/pat_psm.c: pat_init_cell - cell 0x0000000000c6cf28 rc -1


(F)irst, (L)ast, (N)ext or , (P)revious, ^B to exit to menu
Line 1631 in /ux/core/kern/common/io/pat_psm.c: pat_module_init - init cell failed - rc -1, cell 1

Line 827 in /ux/core/kern/common/io/cb_cdio.c: cb_module_init - mod init status -3
gate64: sysvec_vaddr = 0xc0002000 for 2 pages

Interrupt Type 15 (Data page fault):
Instruction Address (pcsq.pcoq) = 0x0.0x27199c
Instruction (iir) = 0x0ee01093 (load/store)
Target Address (isr.ior) = 0x0.0xfffffffffc0f0500
Base Register (gr23) = 0xfffffffffc0f0500
Savestate Ptr (ssp) = 0x0.0x00000000009fa0a0
Savestate Return Pointer (ss_rp) = 0x00000000002718f0


and how to next step?